Lenovo A660 repuestos

Technical Characteristics of Lenovo A660 Repuestos

The Lenovo A660 is a robust smartphone, known for its durability and water-resistant capabilities. Here are the technical characteristics of its key replacement parts (repuestos):

• Screen: 4.0 inches, 480 x 800 pixels, capacitive touchscreen.
• Battery: Li-Po 1500 mAh battery providing up to 600 hours of standby time.
• Camera: 5 MP rear camera, 0.3 MP front camera.
• Processor: Dual-core 1.0 GHz Cortex-A9.
• Memory: 512 MB RAM, 4 GB internal storage, expandable up to 32 GB with microSD.
• Operating System: Android 4.0 (Ice Cream Sandwich).
• Connectivity: Wi-Fi 802.11 b/g/n, Bluetooth 2.1, GPS, microUSB 2.0.

Instructions for Replacing Lenovo A660 Repuestos

Follow these detailed instructions to replace the key components of the Lenovo A660:

1. Replacing the Screen

• Turn off the phone and remove the battery.
• Use a hairdryer or heat gun to soften the adhesive around the screen.
• Gently use a plastic pry tool to separate the screen from the housing.
• Disconnect the ribbon cables connecting the screen to the motherboard.
• Replace the old screen with the new one and carefully reconnect the ribbon cables.
• Reassemble the phone and turn it on to test the new screen.

2. Replacing the Battery

• Turn off the phone and remove the back cover.
• Locate and remove the battery.
• Insert the new battery into the battery compartment, making sure it is properly aligned.
• Replace the back cover and turn on the phone to ensure the new battery works.

3. Replacing the Camera

• Turn off the phone and remove the battery.
• Remove the back cover and locate the screws holding the camera module.
• Remove the screws and gently disconnect the camera module from the motherboard.
• Replace the old camera module with the new one and secure it with screws.
• Reattach the back cover and battery, then turn on the phone to test the new camera.

4. Replacing the Motherboard

• Turn off the phone, remove the battery and SIM card.
• Remove the back cover and all screws holding the housing together.
• Gently use a plastic pry tool to open the phone and expose the motherboard.
• Disconnect all ribbon cables and screws securing the motherboard.
• Carefully remove the old motherboard and replace it with the new one.
• Reconnect all cables, screws, and reassemble the phone.
• Insert the battery and SIM card, turn on the phone to ensure the motherboard functions correctly.