Lenovo A680 repuestos

Technical Characteristics of Lenovo A680 Repuestos

The Lenovo A680 is a reliable smartphone known for its functionality and durability. When it comes to replacement parts (repuestos), it's important to know the specifications to ensure compatibility and longevity. Below, you will find detailed technical characteristics for key Lenovo A680 replacement parts:

Screen

• Size: 5.0 inches
• Resolution: 480 x 854 pixels
• Type: Capacitive touchscreen, 16M colors

Battery

• Type: Li-Po 2000 mAh
• Stand-by: Up to 336 h (2G) / Up to 299 h (3G)
• Talk time: Up to 17 h (2G) / Up to 13 h (3G)

Camera

• Primary: 5 MP, 2592 х 1944 pixels, autofocus, LED flash
• Video: 720p@30fps

Storage

• Internal: 4 GB
• RAM: 1 GB
• Expandable: microSD, up to 32 GB

Instructions on How to Replace Lenovo A680 Repuestos

Replacing Lenovo A680 parts requires careful attention to detail and proper handling of delicate components. Follow the steps below to replace key parts of your Lenovo A680:

1. Replacing the Screen

• Step 1: Power off your Lenovo A680.
• Step 2: Remove the back cover and battery.
• Step 3: Remove all screws securing the mid-frame using a screwdriver.
• Step 4: Carefully detach the mid-frame by gently prying it open.
• Step 5: Disconnect the screen's flex cable from the motherboard.
• Step 6: Use a heat gun to soften the adhesive around the edges of the screen.
• Step 7: Gently lift and remove the broken screen.
• Step 8: Install the new screen by aligning it properly and connecting the flex cable.
• Step 9: Reassemble the phone by reversing the steps above.

2. Replacing the Battery

• Step 1: Power off your device.
• Step 2: Remove the back cover.
• Step 3: Take out the old battery carefully.
• Step 4: Insert the new battery into the compartment.
• Step 5: Replace the back cover and power on the device.

3. Replacing the Camera

• Step 1: Power off your phone.
• Step 2: Remove the back cover, battery, and mid-frame.
• Step 3: Locate the camera module on the motherboard.
• Step 4: Disconnect the camera’s connector from the motherboard.
• Step 5: Gently lift and remove the old camera module.
• Step 6: Place the new camera module in and connect the flex connector.
• Step 7: Reassemble the phone by following the reverse steps.

Precautions

• Always handle components with care to avoid damage.
• Use appropriate tools for disassembly and reassembly.
• Ensure all connections are secure before powering on the device.