Lenovo A706 repuestos

Technical Characteristics of Lenovo A706 Repuestos

General Specifications

• Brand: Lenovo
• Model: A706
• Processor: Qualcomm Snapdragon 200, Quad-core 1.2 GHz Cortex-A5
• RAM: 1 GB
• Internal Storage: 4 GB
• External Storage: MicroSD up to 32 GB
• Display: 4.5 inches IPS LCD, 480 x 854 pixels resolution
• Battery: Li-Po 2000 mAh

Repuestos (Spare Parts)

• Display Assembly
• Battery
• Charging Port
• Back Cover
• Front Camera
• Rear Camera

Instructions to Replace Lenovo A706 Repuestos

Required Tools

• Small Phillips screwdriver
• Plastic opening tools
• Tweezers
• Suction cup tool
• Anti-static wrist strap

Replacing the Display Assembly

Step 1: Power off the device and remove the back cover.

Step 2: Remove the battery and the SIM/microSD cards.

Step 3: Use the Phillips screwdriver to unscrew all the visible screws on the back of the device.

Step 4: Carefully use the plastic opening tools to separate the rear housing from the main frame.

Step 5: Disconnect the ribbon cable connectors attached to the mainboard using tweezers.

Step 6: Gently pry out the old display assembly using the suction cup tool.

Step 7: Align and place the new display assembly into the frame carefully.

Step 8: Reconnect the ribbon cable connectors and reassemble the rear housing.

Step 9: Screw back all the screws and replace the battery, SIM/microSD cards.

Step 10: Power on the device to check if the new display is functioning properly.

Replacing the Battery

Step 1: Power off the device and remove the back cover.

Step 2: Remove the old battery by lifting it from the battery compartment.

Step 3: Insert the new battery into the battery compartment.

Step 4: Replace the back cover and power on the device to ensure it functions correctly.

Replacing the Charging Port

Step 1: Follow steps 1 to 4 described in ""Replacing the Display Assembly"" to expose the mainboard.

Step 2: Locate the charging port and gently disconnect it from the mainboard using tweezers.

Step 3: Carefully remove the old charging port.

Step 4: Install the new charging port and reconnect it to the mainboard.

Step 5: Reassemble the device following steps 8 to 10 described in ""Replacing the Display Assembly"".

Replacing the Back Cover

Step 1: Power off the device and remove the old back cover.

Step 2: Align the new back cover with the device.

Step 3: Press gently around the edges to snap it into place.

Step 4: Ensure that all clips are properly engaged.

Replacing the Front or Rear Camera

Step 1: Follow steps 1 to 4 described in ""Replacing the Display Assembly"" to expose the mainboard.

Step 2: Locate the camera module (front or rear) on the mainboard.

Step 3: Use tweezers to disconnect the camera module ribbon cable from the mainboard.

Step 4: Carefully remove the old camera module.

Step 5: Place the new camera module into the slot and reconnect the ribbon cable.

Step 6: Reassemble the device following steps 8 to 10 described in ""Replacing the Display Assembly"".