Lenovo S850 spare parts

    There are 2 products.

    Technical Characteristics of Lenovo S850 Repuestos

    The Lenovo S850 Repuestos are parts that can be replaced when they fail or wear out in the Lenovo S850 device. The following are the key technical characteristics of different Lenovo S850 Repuestos:

    • Screen Replacement: Lenovo S850 features a multi-touch IPS LCD screen with 720 x 1280 pixels r...

    Technical Characteristics of Lenovo S850 Repuestos

    The Lenovo S850 Repuestos are parts that can be replaced when they fail or wear out in the Lenovo S850 device. The following are the key technical characteristics of different Lenovo S850 Repuestos:

    • Screen Replacement: Lenovo S850 features a multi-touch IPS LCD screen with 720 x 1280 pixels resolution, replaceable if damaged or unresponsive.
    • Battery: It's powered by a replaceable Lithium Polymer 2000 mAh battery.
    • Camera: The device comes with a rear 13 MP camera and front 5 MP camera, both can be replaced in case of any malfunction.
    • Charging Port: This is where the phone’s charger is plugged in. It can also be replaced if malfunctioning.

    Instructions for replacing Lenovo S850 Repuestos

    The procedure of replacing parts in a Lenovo S850 smartphone should be carried out by a qualified technician. Below are the general guidelines:

    Screen Replacement

    • Turn off the device and remove the SIM card tray.
    • Heat the edges of the screen using a heat gun to melt the adhesive.
    • Use a suction cup and plastic opening tools to carefully pry the screen from the rest of the device.
    • Replace the faulty screen with a new one and reassemble the device.

    Battery Replacement

    • Switch off the device and open the back panel.
    • Detach the connector that connects the battery to the motherboard.
    • Remove the faulty battery and replace it with the new one.
    • Reattach the connector and reassemble the device.

    Camera Replacement

    • Turn off the device and open the back panel.
    • Disconnect the camera connector from the motherboard.
    • Remove the faulty camera and replace it with the new one.
    • Reconnect the camera connector and reassemble the device.

    Charging Port Replacement

    • Turn off the device and open the back panel.
    • Unscrew the screws holding the charging port in place.
    • Unplug the ribbon cable connected to the port and remove the faulty charging port.
    • Replace with the new charging port and reassemble the device.
    Less
    More
    Showing 1 - 2 of 2 items