Lenovo Z5 Pro spare parts

Technical characteristics of Lenovo Z5 Pro repuestos

The Lenovo Z5 Pro repuestos include a variety of parts and features designed to ensure the optimal performance and functionality of the device. Here is an overview of its key characteristics:

• Display: The Lenovo Z5 Pro comes with a Super AMOLED capacitive touchscreen measuring 6.39 inches that offers a resolution of 1080 x 2340 pixels.
• Processor: It is powered by a Qualcomm SDM710 Snapdragon 710 (10 nm) processor with Octa-core (2x2.2 GHz 360 Gold & 6x1.7 GHz Kryo 360 Silver).
• Memory: The device has a 6 GB RAM and comes in two variants with 64 GB and 128 GB of internal storage.
• Camera: Its dual primary camera features a 16 MP, f/1.8, 1/2.6", 1.22µm, PDAF and a 24 MP, 1/2.8", 0.9µm. It also has a mechanical pop-up dual selfie camera that includes a 16 MP, f/2.2 and 8 MP.
• Battery: A Non-removable Li-Po 3350 mAh battery powers the phone.

Replacement of Lenovo Z5 Pro repuestos:

Tools required:

• Small Phillips screwdriver
• Spudger tool or plastic opening tool
• Heat gun or hairdryer

Steps:

Before starting, power down your Lenovo Z5 Pro phone to avoid any damage to the components.

• Step 1: Start by removing the SIM tray located on the side of the device.
• Step 2: Using a heat gun, heat the edges of the back cover to loosen the adhesive.
• Step 3: Insert a plastic opening tool or spudger under the back cover and carefully pry it open.
• Step 4: Remove the back cover, revealing the internal components of the phone. Be careful not to damage any parts.
• Step 5: Unscrew the screws securing the motherboard shield using the small Phillips screwdriver. Then, remove the shield.
• Step 6: Disconnect the battery connector from the motherboard. Then, disconnect the display connector next to the battery connector.
• Step 7: At this point, you can replace the necessary component (e.g., battery, display, camera module). Reassemble your phone by following these steps in reverse order.