LG G3 Stylus D690 spare parts

Technical Specifications of LG G3 Stylus D690 Repuestos

The LG G3 Stylus D690, a smartphone released in 2014, is still a reliable and popular device among consumers. Here, we will detail its technical characteristics.

• Operating System: Android OS, v4.4.2 (KitKat)
• Chipset: Mediatek MT6582
• CPU: Quad-core 1.3 GHz Cortex-A7
• Screen: IPS LCD, 540 x 960 pixels, 5.5 inches (~200 ppi density)
• Memory: 8 GB Internal storage, 1 GB RAM
• Camera: Primary 13 MP, Secondary 1.3 MP
• Battery: Removable Li-Ion 3000 mAh battery

Instructions for Replacing LG G3 Stylus D690 Repuestos

If you need to replace any part of the LG G3 Stylus D690, follow the steps outlined below. Ensure that you have the correct replacement parts (repuestos) before initiating the repair process.

Disassembling the Phone

• Power off your LG G3 Stylus and remove the back cover and battery.
• Remove the SIM card and SD card if they are in the phone.
• Use a small screwdriver to remove the screws present on the rear of the device.
• With the use of a thin plastic card or similar tool, carefully wedge the tool between the back plastic cover and the phone chassis, and gently separate the two.

Replacing the Desired Part

This will vary depending on what specific part you plan to replace. Here, we will assume you are replacing the screen.

• Gently disconnect the display connectors from the mother board.
• Remove any screws securing the display frame to the device and carefully lift it away.
• Place your new screen onto the phone chassis, ensuring it is correctly aligned.
• Reconnect the display connectors to the motherboard.
• Secure the new screen with the previously removed screws.

Reassembling the Phone

• Re-attach the plastic back cover to the phone chassis, ensuring it snaps safely into place.
• Replace the screws at the back of the device using a screwdriver.
• Reinsert the SIM card, SD card, and battery.
• Attach the back cover to the phone.
• Power on the device to ensure everything works as intended.

Please remember to perform these steps gently and carefully to avoid damaging the device or injuring yourself.