LG K20 2019 spare parts

    There are 15 products.

    Technical Characteristics of LG K20 2019 Repuestos

    The LG K20 2019 repuestos include several major components that make up the device, providing it with the needed functionality. Let's understand each component in detail:

    • Display: The LG K20 2019 features a Full HD+ 5.45-inch panel with a resolution of 480 x 960 pixels.
    • Battery: The devic...

    Technical Characteristics of LG K20 2019 Repuestos

    The LG K20 2019 repuestos include several major components that make up the device, providing it with the needed functionality. Let's understand each component in detail:

    • Display: The LG K20 2019 features a Full HD+ 5.45-inch panel with a resolution of 480 x 960 pixels.
    • Battery: The device is powered by a 3000mAh non-removable battery.
    • Camera: The smartphone is equipped with an 8 MP, f/2.0 rear camera and a 5 MP front camera with a f/2.2 lens.
    • CPU: The LG K20 2019 repuestos includes the Quad-core 1.4 GHz Qualcomm MSM8909 Snapdragon 210 processor for smooth and efficient performance.
    • RAM and Storage: The phone comes with 1GB of RAM and 16GB internal storage expandable up to 32GB via a MicroSD card.

    Instructions for Replacing LG K20 2019 Repuestos

    Here is a detailed guide on how to replace the major components of your LG K20 2019 smartphone:

    Step 1: Tools Preparation

    Before you start with the replacement process, make sure you have all necessary tools at hand. These include a plastic opening tool, a fine-tip curved tweezers, a Phillips screwdriver, and a spudger.

    Step 2: Remove the Back Cover

    Use the plastic opening tool to pry off the back cover from the bottom of the phone, and then take it off completely using the spudger tool.

    Step 3: Disconnect the Battery

    Remove all the screws securing the battery using the Phillips screwdriver. Then, disconnect the battery connector by gently lifting it up using the spudger tool.

    Step 4: Replacing the Component

    If you are replacing a specific component, identify it first, then carefully remove it from its slot. If it is fixed, you might need to unscrew it first. Replace with the new component in the same orientation.

    Step 5: Reassemble the Phone

    After replacing the part, reassemble your phone by reconnecting the battery and screwing it back in. Then, place the back cover on your smartphone and press down to snap it back into place.

    Note: Always remember to power off your device before beginning any replacement procedure. This guide serves as a general outline for component replacement and your device may differ slightly.

    Less
    More
    Showing 1 - 15 of 15 items