LG K3 K100 spare parts

Technical Specifications of LG K3 K100 Repuestos

The LG K3 K100 Repuestos includes the following key specs:

• Display: 4.5" FWVGA (854 x 480)
• Processor: Qualcomm Snapdragon 210
• Camera: 5MP Rear, 2MP Front
• Operating System: Android Marshmallow 6.0
• Battery: 2100mAh (Removable)

Instructions on Replacing LG K3 K100 Repuestos

Tools Needed

• Small Phillips Screwdriver
• Plastic Opening Tool
• Spudger Tool

Instructions

• Step 1:

  Power off your LG K3 K100 to avoid any electrical interference during the procedure.

• Step 2:

  Remove the back cover of the phone using the plastic opening tool to gently pry at the edge.

• Step 3:

  Remove the battery from the phone by lifting it from the bottom edge.

• Step 4:

  Use the small Phillips screwdriver to remove all screws from the back of the phone.

• Step 5:

  Use the plastic opening tool to gently pry and remove the middle frame cover.

• Step 6:

  From here, locate and disconnect the ribbon connector of the part you need to replace (e.g., camera, display, motherboard).

• Step 7:

  Using your spudger tool, carefully lift and remove the part that needs to be replaced.

• Step 8:

  Place your new part into the phone and ensure the ribbon connector is securely connected.

• Step 9:

  Follow the disassembly instructions in reverse order for reassembly.

Note

Follow these instructions carefully to ensure that all parts are properly and safely replaced. If at any point you feel uncomfortable or unsure, seek professional help.