LG Optimus G E970 spare parts

    There are 4 products.

    Technical Characteristics of LG Optimus G E970 Repuestos

    The LG Optimus G E970 Repuestos include quality parts which improve the durability and efficiency of your device.

    • Screen: 4.7" True HD IPS Plus Display
    • Processor: Qualcomm Snapdragon S4 Pro APQ8064 1.5 GHz Quad-core
    • Memory: 16GB Internal Memory & 2GB RAM
    • Camera: 8 MP Prima...

    Technical Characteristics of LG Optimus G E970 Repuestos

    The LG Optimus G E970 Repuestos include quality parts which improve the durability and efficiency of your device.

    • Screen: 4.7" True HD IPS Plus Display
    • Processor: Qualcomm Snapdragon S4 Pro APQ8064 1.5 GHz Quad-core
    • Memory: 16GB Internal Memory & 2GB RAM
    • Camera: 8 MP Primary Camera with LED flash, 1.3 MP Front Camera
    • Battery: 2100 mAh Li-Po Battery (Non-Removable)

    Instructions For Replacing LG Optimus G E970 Repuestos

    Tools required:

    Before starting the repair, you need tools such as a plastic opening tool, a small Phillips screwdriver, and a spudger.

    Step 1: Power Off and Remove Back Cover

    First, power off the LG Optimus G E970 and remove the back cover. Use the plastic opening tool to pry the back cover starting from the bottom.

    Step 2: Remove the Battery

    Remove the 2100 mAh battery from the LG Optimus G E970. Simply lift the battery from the top.

    Step 3: Remove the Screws

    Next, remove the 15 small screws with the Phillips screwdriver that are holding the rear frame in place. Remember to keep the screws safely for later use.

    Step 4: Separate the Rear Frame

    Use the plastic tool again to separate the rear frame from the device. This will reveal the motherboard.

    Step 5: Disconnect the Cables

    Disconnect the three ribbon cables connected to the motherboard using the spudger.

    Step 6: Remove the Motherboard

    Lift the motherboard up and out of the device.

    Step 7: Replace the Damaged Parts

    At this point, you can replace the necessary parts such as the screen or the camera. When ready, reassemble the phone by following the steps in reverse order.

    Remember to reconnect the three ribbon cables, screw back in the 15 screws, and put the battery and back cover back on the phone.

    Less
    More
    Showing 1 - 4 of 4 items