LG V50 Thinq spare parts

Technical Characteristics of LG V50 Thinq Repuestos

The LG V50 Thinq repuestos, are the replacement parts that you may need to repair your LG V50 Thinq smartphone. Here, we will detail out the common components that might require replacement:

• Screen Display

  The replacement part for the screen display is a 6.4 inch OLED capacitive touchscreen that comes with a 1440 x 3120 pixels resolution.

• Battery

  The battery replacement part is a non-removable Li-Po 4000 mAh battery.

• Charging Port

  The charging port replacement is a Quick Charge 3.0, USB Power Delivery 2.0 and USB 3.1 connector type-C 1.0.

• Camera lens and sensor

  The replacement parts for the camera are a 12 MP, 27mm (standard) back camera, and an 8 MP, 26mm (standard) front camera.

Instructions for Replacing LG V50 Thinq Repuestos

But before going into any repair or replacement process, you need to remember that such actions could void the warranty of the smartphone or even cause more damage if not done properly.

• Screen Display

  • Switch off the phone and remove the sim card tray.
  • Heat the edges of the display to loosen the adhesive.
  • Use a suction cup and plastic opening tool to carefully separate the screen from the phone body.
  • Replace the old screen with the new one.
  • Reassemble the phone in reverse order.

• Battery

  • Switch off the phone and remove the sim card tray.
  • Remove the back cover of the phone carefully.
  • Unscrew the bolts that secure the battery to the phone.
  • Replace the old battery with the new one.
  • Reassemble the phone in reverse order.

• Charging Port

  • Switch off the phone and remove the sim card tray.
  • Remove the back cover of the phone carefully.
  • Unclip the charging port connector from the motherboard.
  • Replace the old charging port with the new one.
  • Reassemble the phone in reverse order.

• Camera Lens and Sensor

  • Switch off the phone and remove the sim card tray.
  • Remove the back cover of the phone carefully.
  • Unscrew the bolts that secure the camera to the phone.
  • Replace the old camera lens/sensor with the new one.
  • Reassemble the phone in reverse order.

These are general instructions and might vary based on the type of component being replaced. Be sure to always refer to specific instructions provided with your replacement parts.