Vibrator LG

    There is 1 product.

    Vibrador LG Technical Characteristics

    The Vibrador LG, also referred to as the LG Vibration Motor, is a crucial component in LG smartphones that allows tactile feedback. Some of its technical characteristics are listed below:

    • Manufacturer: LG Electronics
    • Type: Eccentric Rotating Mass (ERM) Motor
    • Input Voltage: 2.7V - 3.3V DC
    • Pow...

    Vibrador LG Technical Characteristics

    The Vibrador LG, also referred to as the LG Vibration Motor, is a crucial component in LG smartphones that allows tactile feedback. Some of its technical characteristics are listed below:

    • Manufacturer: LG Electronics
    • Type: Eccentric Rotating Mass (ERM) Motor
    • Input Voltage: 2.7V - 3.3V DC
    • Power Consumption: 75mA - 105mA under load
    • Expected Life: Around 500,000 to 1,000,000 cycles
    • Speed: Approximately 12,000 RPM under load

    Instructions to Replace Vibrador LG

    Before beginning the replacement process, meticulously organize your tools, keep the phone properly cleaned and ensure you are working in a well-lit, clutter free environment.

    Step 1: Turn off your LG Phone

    Power off your LG smartphone. This minimizes the risk of any short-circuit during the replacement process.

    Step 2: Remove the Back Cover

    Use a professional mobile repair toolkit to Open the back cover of your phone. For some LG models, this may require removing any securing screws.

    Step 3: Remove the Battery

    Once the back cover is removed, carefully lift out the battery with a plastic opening tool.

    Step 4: Locate the Vibrador LG

    The Vibrador LG can often be found near the bottom of the phone housed in a rubber gasket.

    Step 5: Disconnect the Vibrador LG

    Using a pair of precision tweezers, disconnect the connectors linking the Vibrador LG to the main circuit board.

    Step 6: Remove the Vibrador LG

    Carefully remove the Vibrador LG from its gasket. Ensure the gasket remains intact as you will need it for the new Vibrador LG.

    Step 7: Install the New Vibrador LG

    Place the new Vibrador LG into the gasket. Connect its pins to the main circuit board.

    Step 8: Reassemble your Phone

    Once you've replaced the Vibrador LG, reassemble your phone in the reverse order of disassembly. Be sure to properly reconnect any connectors and reinsert any screws removed.

    *Remember to wear ESD-safe gloves or wristbands to prevent building up a static charge that could damage your device. Make sure your device is no longer under warranty, as attempting a repair yourself will void it.

    Less
    More
    Showing 1 - 1 of 1 item