Display lcd M4tel

Pantalla LCD M4tel Specifications

The Pantalla LCD M4tel is an advanced display component of the M4tel series.

• Resolution: High-resolution (defined by the model of the phone).
• Type: IPS LCD capacitive touchscreen, 16M colors.
• Size: Varies based on the model of the phone starting from 5.0 inches.
• Multi-Touch: Supported.
• Protection: Corning Gorilla Glass (depending on model).

Instructions for Replacing Pantalla LCD M4tel

Tools Needed

• Small Phillips Head Screwdriver.
• Small Flathead Screwdriver.
• Prying Tool.
• New Pantalla LCD M4tel.

Steps to Replace Pantalla LCD M4tel

Before you start follow these steps, make sure to power off your device and take the back cover off.

• Unscrew and remove the screws secured in the back of the phone using the Phillips Head Screwdriver.
• Use the Flathead Screwdriver to unclip any clips holding the back part of the phone together.
• With the Prying Tool, carefully lift up the back body of the phone to expose the motherboard.
• Locate the screen’s cable connector on the motherboard. This is usually a ribbon wire with a clip.
• Unclip the old LCD screen cable connector from the motherboard. The old screen should now be free to remove.
• Take your new Pantalla LCD M4tel screen and connect the screen’s ribbon wire to the motherboard.
• Check the new screen’s functioning by powering the device on to ensure it’s working properly.
• If the new screen is working as expected, screw back the covers and clips into place to secure the device.

Note: Please proceed carefully and at your own risk. If unsure, seek professional assistance.