M4Tel SS880 spare parts

Technical Characteristics of M4Tel SS880 Repuestos

Main Components

• Display Screen: 5.5 inches, 1080 x 1920 pixels, IPS LCD capacitive touchscreen.
• Battery: Li-Ion 3000 mAh, removable.
• Camera: 13 MP primary camera, 8 MP secondary camera.
• Processor: Octa-core 1.5 GHz Cortex-A53.
• RAM: 2 GB.
• Storage: 16 GB internal, expandable via microSD up to 128 GB.
• OS: Android 7.0 Nougat.

Instructions on How to Replace M4Tel SS880 Repuestos

Tools Required

• Plastic Pry Tool
• Suction Cup
• Small Phillips Head Screwdriver
• Tweezers
• Heat Gun or Hair Dryer

Step-by-Step Instructions

Step 1: Power Off the Device

Ensure the M4Tel SS880 is completely powered off before starting the repair process. Hold the power button and select ""Power Off.""

Step 2: Remove the Back Cover

Use a plastic pry tool to gently separate the back cover from the device. Start from a corner and work your way around the perimeter of the phone.

Step 3: Take Out the Battery

Once the back cover is removed, lift the battery out of its compartment using a plastic pry tool or your fingers.

Step 4: Unscrew the Midframe

Use a small Phillips head screwdriver to remove all screws securing the midframe. Keep the screws in a safe place as you will need them later.

Step 5: Separate the Midframe

Using the plastic pry tool, gently work around the edges to release the midframe from the front assembly.

Step 6: Disconnect the Cables

Use tweezers to carefully disconnect the ribbon cables connecting the screen, motherboard, and other components.

Step 7: Remove the Damaged Part

If replacing the screen, use a heat gun or hair dryer to soften the adhesive around the edges. Use a suction cup to lift the screen and a plastic pry tool to carefully separate it from the front assembly. For other parts, gently lift or unscrew the damaged part from the device.

Step 8: Install the New Component

Place the new component (e.g., display screen) into the device and align it properly. Reconnect all previously disconnected cables securely.

Step 9: Reassemble the Midframe

Align the midframe with the front assembly and press them together until they click into place. Replace and tighten all screws using the Phillips head screwdriver.

Step 10: Insert the Battery

Place the battery back into its compartment and ensure it is securely seated.

Step 11: Attach the Back Cover

Align the back cover with the device and press down around the edges until it snaps into place.

Step 12: Power On the Device

Hold the power button to turn on the M4Tel SS880 and check if the new part is functioning correctly.