Malata touch screen

Technical Characteristics of Malata Táctil

• Screen Size: 5.5 inches
• Resolution: 1080 x 1920 pixels
• Touch Screen Type: Capacitive Multi-touch
• Processor: Octa-core 2.0 GHz
• RAM: 3 GB
• Internal Storage: 32 GB
• Expandable Storage: Up to 128 GB via microSD
• Battery: 3000 mAh non-removable
• Rear Camera: 13 MP
• Front Camera: 8 MP
• Operating System: Android 7.0 Nougat
• Connectivity: 4G LTE, Wi-Fi, Bluetooth 4.0, GPS

Instructions on How to Replace Malata Táctil

Required Tools and Materials

• Replacement Malata Táctil screen
• Precision screwdriver set
• Plastic prying tools
• Suction cup tool
• Adhesive strips
• Antistatic wrist strap (optional)
• Heat gun or hairdryer
• Plastic spudger
• Isopropyl alcohol and microfiber cloth

Step-by-Step Replacement Instructions

1. Power off the Device: Ensure that your Malata Táctil is powered off completely before beginning the replacement process.

2. Remove the Back Cover: Use the plastic prying tools to gently lift and remove the back cover of the phone. Be careful not to damage any internal components.

3. Disconnect the Battery: Locate the battery connector and use the plastic spudger to disconnect it. This will prevent any electrical short circuits during the replacement.

4. Remove Screws: Using the appropriate precision screwdriver, carefully unscrew all screws securing the internal components and the display assembly.

5. Release the Screen Assembly: Heat the edges of the screen using a heat gun or hairdryer to soften the adhesive. Place the suction cup tool on the screen and gently lift, while using the plastic prying tool to separate the screen from the frame.

6. Disconnect the Screen: Once the screen is lifted, carefully disconnect the screen's flex cables from the motherboard. Note the placement of each cable for reassembly.

7. Clean the Frame: Use isopropyl alcohol and a microfiber cloth to clean any residual adhesive from the frame to ensure a smooth surface for the new screen.

8. Install the New Screen: Align the new Malata Táctil screen and connect the flex cables to the motherboard. Ensure all connections are secure and properly seated.

9. Secure the Screen: Carefully place the screen into the frame. Apply adhesive strips around the edges of the frame to secure the new screen in place.

10. Reassemble the Device: Reinsert all screws to secure the internal components and reconnect the battery. Carefully snap the back cover into place.

11. Power On and Test: Power on the device and test the new screen's functionality, including touch sensitivity and display clarity. Ensure that all other components are functioning correctly.

12. Final Check: Perform a final check to ensure that the screen is properly attached and that there are no loose components.

Additional Tips

• Work in a clean and static-free environment to prevent damage to internal components.
• Take your time during the replacement process to avoid mistakes.
• If you encounter any issues, consider seeking professional assistance.