Meizu 16S Pro repuestos

Technical Characteristics of Meizu 16S Pro Repuestos

The Meizu 16S Pro Repuestos includes the following parts:

• Super AMOLED capacitive touchscreen, 16M colors
• 6.2 inches size, 95.8 cm2 (~85.9% screen-to-body ratio)
• Qualcomm SM8150 Snapdragon 855+ (7 nm) chipset
• 128GB 6GB RAM, 128GB 8GB RAM, 256GB 8GB RAM Internal memory
• Triple Camera system: 48 MP, 20 MP and 16 MP
• Non-removable Li-Po 3600 mAh battery

How to replace Meizu 16S Pro Repuestos

Tools Needed

• Guitar pick or prying tool
• Precision screwdriver
• Sim card ejector tool
• Plastic card

Instructions

Before you start, make sure to turn off your device and remove the Sim card and any memory card that may be inserted.

Step 1: Using your prying tool carefully pry open the back cover from the phone. Be careful not to damage the cover.

Step 2: With the back cover removed you will see various screws that hold the phone together. Use your precision screwdriver to remove them.

Step 3: Once all the screws are removed you can start removing the other parts such as the battery, cameras and the logic board. Be careful not to pull too hard as you may damage the connectors.

Step 4: With the device completely disassembled you can now replace the necessary parts. Once you have replaced the parts you can start reassembling the phone. Follow the steps in reverse to put the phone back together.

Step 5: Be sure to test the device after putting it all together. Test the screen, buttons, cameras and other features to ensure they are functioning correctly.

Note: Make sure to keep track of the screws and where they belong. Losing a screw or placing it in the wrong area may result in damage to the device. Always work in a clean, well-lit area.