Meizu Meilan M3E spare parts

Technical Characteristics of Meizu Meilan M3E Repuestos

The Meizu Meilan M3E Repuestos is an essential element of the Meizu Meilan M3E phone model intended for repair or replacement purposes. It includes several parts and components crucial to the functioning of the device.

Components

• LCD Display: This part is responsible for all visible display on the phone. It is a 5.5" LCD with a resolution of 1080 x 1920 pixels.
• Battery: The device uses a non-removable Li-Ion battery with a capacity of 3100 mAh.
• Touch Screen Digitizer: This component registers touchscreen input and relays it to the operating system.
• Camera Lenses: Includes a 13 MP rear camera and a 5 MP front camera.
• Motherboard: Serves as the primary circuit board and hosts crucial components such as CPU, GPU, and memory.

Instructions for Replacing Meizu Meilan M3E Repuestos

Please follow the subsequent steps with care. Note that you should possess a basic understanding of electronic device repair to prevent irreparable damage to your smartphone.

Tools Needed

• Professional phone opening kit
• Philips Screwdriver
• Suction cup
• Hot air gun

Replacement Instructions

1. Switch off the phone and gently heat the edges of the back cover with a hot air gun.

2. Slowly lift the back cover using a suction cup or a plastic tool from the professional phone opening kit.

3. Proceed to unscrew the screws visible after removing the back cover using the Philips screwdriver.

4. Take out the battery connector and the data cable.

5. Replace the required component with the new repuesto while making sure it fits in correctly.

6. Refix the data cable and battery connector.

7. Repeat the disassembly steps in reverse to reassemble the phone.

Note: Please perform these steps with care. If uncertain about any steps or faced with unusual difficulties, seek assistance from a professional repair service.