Meizu MX6 Pro spare parts

Technical Characteristics of Meizu MX6 Pro Repuestos

The Meizu MX6 Pro is equipped with a variety of components that can be replaced. Some of the technical characteristics of these repuestos include:

• Display: 5.5-inch 1080 x 1920 pixels LCD capacitive touchscreen
• Processor: Mediatek MT6797 Helio X20
• RAM: 4GB
• Internal Storage: 32GB, expandable with a card slot
• Battery: 3060 mAh, non-removable
• Rear Camera: 12 MP, f/2.0, wiith LED flash, phase detection autofocus
• Front Camera: 5MP, f/2.0 for selfies

Instructions for replacing Meizu MX6 Pro Repuestos

Below is a step-by-step guide for replacing various Meizu MX6 Pro components:

Replacing the Screen Display

Here are the required steps to replace the old and broken screen display with a new one:

• Switch off the phone and carefully remove the SIM card tray.
• With the help of a plastic tool, separate the back cover from the main body.
• Once the case is open, locate the display connector on the logic board and disconnect it.
• Remove the damaged screen carefully not to harm any adjoining parts.
• Place the new screen and reconnect the display connector on the logic board.
• Re-assemble the phone by fastening the back cover.

Replacing the Battery

The Meizu MX6 Pro battery replacement steps are as follows:

• Switch off your Meizu MX6 Pro and remove the case carefully.
• Locate the battery connector on the logic board and disconnect it.
• Gently remove the old battery from the phone.
• Insert the new battery and reconnect the battery connector on the logic board.
• Reassemble the phone by putting back the case.

Please remember to handle every part with care while performing these operations and use the right tools designed specially for phone repair.