Motorola Droid 3 repuestos

Motorola Droid 3 Repuestos Technical Specifications

The Motorola Droid 3 smartphone features advanced technical characteristics that include:

• System: Android 2.3 (Gingerbread), not upgradable to 4.0 (Ice Cream Sandwich)
• CPU: 1.0 GHz Texas Instruments OMAP 4430
• RAM: 512MB
• Storage: 16GB, expandable up to 32GB via MicroSD
• Display: 4.0 inch TFT capacitive touchscreen, 16M colors
• Resolution: 540 x 960 pixels, 16:9 ratio (~275 ppi density)
• Camera: 8 MP, AF, LED flash
• Battery: Removable Li-Ion 1500mAh battery

Instructions for Replacing Motorola Droid 3 Repuestos

Tools Needed

The replacement procedure requires the following tools:

• Small Phillips screwdriver
• Spudger tool or thin blade flathead screwdriver
• Tweezers (optional)

Procedure

Follow these steps carefully to replace the Repuestos on your Motorola Droid 3:

• Turn off the device and remove the back cover and battery.
• Disconnect the antenna cable from the motherboard using the spudger tool or flathead screwdriver.
• Unscrew the nine screws on the motherboard using the Phillips screwdriver.
• Gently remove the motherboard from the phone.
• Disconnect the LCD and digitizer ribbon cables from the motherboard.
• Replace the damaged part with a new one, then reconnect the ribbon cables.
• Reattach the motherboard to the phone and screw it in place.
• Reconnect the antenna cable to the motherboard.
• Reinstall the battery and back cover.
• Turn on the device to check if the new part is working properly.

Note

This is a general guide and might not match your specific part. Always consult with a professional if you are not confident with the procedure.