Motorola E7 Power Spare Parts

Motorola E7 Power Repuestos - Technical Characteristics

The Motorola E7 Power Repuestos are the key components necessary for the functioning of your Motorola E7 device. Following are the technical specifications of these spare parts.

• Battery: Lithium Polymer 5000mAh.
• Display: IPS LCD, 720 x 1600 pixels, 6.5 inches.
• Processing Unit: Mediatek MT6761 Helio G25 (12 nm), Octa-core.
• Memory: Internal – 32GB/64GB, RAM – 2GB/4GB, Expandable via microSDXC.
• Camera: Rear – Dual 13 MP + 2 MP. Front – 5 MP.
• Operating System: Android 10.

Instructions for Replacing Motorola E7 Power Repuestos

Following the steps below in order, will assist you in replacing the repuestos component of your Motorola E7 power device.

Tools Needed

You will need a Screwdriver, Tweezers, Pry opening tools, and a Heat gun (or Hairdryer).

Step 1: Battery Replacement

• Switch off your phone.
• Use the heat gun to heat around the edges of the back cover to weaken the adhesive.
• Use the pry tool to gently release the back cover from the phone body.
• Remove the screws securing the battery connector and dislodge it.
• Gently lift the battery using tweezers and replace it with a new one.
• Reconnect the battery connector and reassemble the back cover.

Step 2: Display Replacement

• After removing the back cover, locate the display connector.
• Remove the screws securing the display connector and release it with a pry tool.
• Heat the adhesive around the display edges, then remove the damaged display using pry tools.
• Place the new display carefully and connect it to the connector.
• Reassemble the back cover.

Step 3: Camera Replacement

• Open the back cover and locate the camera module.
• Remove the screws securing the module.
• Use the pry tool to dislodge the camera connector.
• Fit the new camera module in place and connect it.
• Reassemble the back cover.

By following these steps, you should be able to replace the essential components of the Motorola E7 Power device effectively.