Motorola Moto E30 spare parts

Motorola Moto E30 Repuestos - Technical Characteristics

The Moto E30 device by Motorola is designed with a suite of technical components that contribute to its overall performance and usability. Here are the main technical characteristics of these components, also referred to as repuestos (spare parts).

• Display: The device is equipped with a 6.5-inch max vision HD+ IPS LCD screen, having 720 x 1600 pixels resolution.
• Processor: The smartphone runs on the Unisoc SC9863A (28nm) chipset.
• Memory: The Moto E30 has 64GB in-built memory, expandable up to 1TB, and 4GB RAM.
• Battery: The device is powered by a Non-removable Li-Po 5000 mAh battery.
• Camera: The main camera features a 13 MP, f/2.2, 26mm (wide), and 2 MP, f/2.4, (depth). The selfie camera features a 5 MP, f/2.4, 27mm (wide).

Instructions for Replacing Motorola Moto E30 Repuestos

Note: Proceed with the following steps only if you have prior experience with mobile phone repair. Incorrect procedures may cause further damage to the device.

Tools Needed

Before starting, make sure you have the following tools:

• Sim Card Ejector
• Phillips Head Screwdriver
• Spudger
• Tweezers
• Plastic Card

Steps

1. Turn off the device: Power off your Motorola Moto E30 before starting the disassembly process.
2. Remove the Sim Card: Use the Sim card ejector tool to remove the Sim Card and memory card from the device.
3. Unscrew the Back panel: Use the Phillips head screwdriver to remove the screws that hold the back panel in place.
4. Disconnect Battery: Use the spudger to disconnect the battery connector from the motherboard.
5. Remove Battery: Gently lift up and remove the battery using the plastic card.
6. Access other components: After successfully taking out the battery, you can now access other components like camera, motherboard etc.
7. Replace necessary parts: Replace the faulty parts with new ones. Ensure the components are original and match the specifications for the Motorola Moto E30.
8. Reassemble the device: After replacing the components, carefully reassemble the device in reverse order of disassembly. Check all connections and make sure everything is placed correctly before screwing back the case.
9. Switch on the device: After the successful reassembly, power on the device to see if it works flawlessly.