Motorola Moto E6I spare parts

Motorola Moto E6I Repuestos - Technical Specifications

The Motorola Moto E6I is a popular smartphone model with some distinguished technical characteristics. Here, we detail the key components or 'repuestos' of Moto E6I for replacement purposes.

• Screen

  The replacement screen is a 6.1 inches IPS LCD Touchscreen displaying 16M colors. The resolution is 720 x 1560 pixels with a 282 ppi density.

• Battery

  The replacement battery is a non-removable Li-Po battery with a capacity of 3000mAh. It supports fast charging and has decent standby time.

• Rear Camera

  The back camera includes a dual set up. The main lens is 13 MP and the depth sensor is 2 MP for capturing high-quality images and video records.

• Front Camera

  The replacement front camera is a 5MP lens with HDR capabilities and serves for video calling and selfies.

• Motherboard

  The motherboard contains an Octa-core processor (1.6 GHz, Dual-core, Cortex A73 + 1.35 GHz, Hexa Core, Cortex A53) along with 2GB RAM.

Instructions for Replacing Motorola Moto E6I Repuestos:

Before starting the replacement process, always ensure you have all the correct tools and replacement parts. Here are the detailed steps:

• Switch off the device

  Before starting to disassemble, turn off the smartphone to avoid any electrical damage.

• Removing the Back Cover

  Use a professional pry tool to gently separate the back cover from the device. Place the tool in the groove between the cover and the body and slowly work your way around the device.

• Unscrewing the Cover Plate

  Unscrew all visible screws in order to remove the cover plate. This will expose the interior of the phone.

• Disconnecting the Battery

  Always disconnect the battery before working on internal components. This is usually done by gently detaching the connecting ribbon from the motherboard.

• Replacing the Desired Component

  Locate the defective component. This might involve removing screws and disconnecting ribbons before the part can be taken out. Once removed, carefully place the new part at the same spot and reconnect any ribbons or screws if necessary.

• Reassembling the Phone

  Once the replacement has been put in place, reconnect the battery, replace the cover plate and fasten all screws. Finally, snap the back cover into place while ensuring it's securely fixed.

• Switch on the Device

  Power on your device to check if all functions are working properly.

• Seeking Professional Help

  If you find any difficulties, don't hesitate to reach out to a professional or seek advice from a trusted source.