Motorola Moto Edge XT2063 spare parts

    There are 22 products.

    Motorola Moto Edge XT2063 Repuestos - Technical Characteristics

    The Motorola Moto Edge XT2063 is a high-performing phone that comes with several resilient components. The list below details the technical specifications of these parts:

    • Screen: OLED capacitive touchscreen, 16M colors, 1080 x 2340 pixels, 19.5:9 ratio (~385 ppi density)
    • Battery:...

    Motorola Moto Edge XT2063 Repuestos - Technical Characteristics

    The Motorola Moto Edge XT2063 is a high-performing phone that comes with several resilient components. The list below details the technical specifications of these parts:

    • Screen: OLED capacitive touchscreen, 16M colors, 1080 x 2340 pixels, 19.5:9 ratio (~385 ppi density)
    • Battery: Non-removable Li-Po 5000 mAh battery
    • Camera: Triple set-up, 64 MP (wide), 8 MP (telephoto), 16 MP (ultrawide), with Dual-LED flash, panorama, HDR functionality
    • Processor: Qualcomm SM8250 Snapdragon 865 (7 nm+)
    • Ram: 128GB 6GB RAM, 256GB 8GB RAM, 256GB 12GB RAM
    • Operating System: Android 10, upgradable to Android 11

    Instructions on replacing Motorola Moto Edge XT2063 Repuestos

    Please note that opening your device can void your warranty. If you're not able to follow these instructions, it's recommended to bring your device to a professional repair service.

    Step 1: Turning off your device

    Before you start, make sure your device is completely switched off.

    Step 2: Removing the SIM card and the tray

    Use an ejector tool or a paperclip to take the SIM card and the tray out.

    Step 3: Unscrewing and removing the back cover

    You will need a T3 torx screwdriver to unscrew the two bottom screws. After that, use a plastic opening tool to gently pry the back cover off.

    Step 4: Disconnecting the battery

    You will see the battery connector on the right. Use a spudger or a plastic opening tool to disconnect it.

    Step 5: Replacing the faulty parts

    This process will depend on the part to replace. Components such as the camera modules, speaker, or charging port can now be replaced with the new working part.

    Step 6: Reassembling the device

    Now, connect the battery back, place the back cover on, and screw it back with the torx screws you removed earlier. Finally, insert your SIM card and the tray back into their respective slots.

    Switch on your device to check if the replaced part is working as expected.

    Warning: The above instructions may vary depending on the exact model of your Motorola device and the part you intend to replace. It's recommended to consult a professional in case of any doubts or difficulties.

    Less
    More
    Showing 1 - 22 of 22 items