Motorola Moto G82 XT2225 spare parts

Technical Characteristics of Motorola Moto G82 XT2225 Repuestos

The Motorola Moto G82 XT2225 Repuestos is known for its advanced features and durability. Here are the major characteristics of the phone's components you need to familiarize yourself with if a repair is required:

• Display: The replacement screen is an LTPS IPS LCD capacitive touchscreen, 16M colors. The size is 6.8 inches, 109.8 cm2 covering about 85.9% of the phone's body.
• Battery: The replacement battery for the Motorola Moto G82 XT2225 is a Non-removable Li-Po 5000 mAh battery.
• Motherboard: The motherboard replacement includes the chipset Qualcomm SM6150 Snapdragon 678 (11 nm).
• Rear Camera: The phone comes with a Triple camera system, comprising 64 MP, f/1.8, 26mm (wide), 1/1.73", 0.8µm, PDAF; 8 MP, f/2.2, 118˚ (ultrawide), 1/4.0", 1.12µm; 2 MP, f/2.2, (depth).
• Front Camera: For the selfie camera, it uses a 16 MP, f/2.2, (wide), 1/3.06", 1.0µm.

Instructions to Replace Motorola Moto G82 XT2225 Repuestos

Below are detailed instructions on how to replace the various components of the Motorola Moto G82 XT2225 Repuestos.

Display

• Ensure your device is turned off and disconnected from any connected devices.
• Warm up the edges of the screen using a heat gun or hairdryer. This loosens the adhesive holding the screen in place.
• Using a pry tool, carefully lift the screen from the edges and remove it.
• Set up the new screen, making sure to affix it properly with the right adhesive, and reassemble the device.

Battery

• Open the phone casing and locate the battery.
• Disconnect the old battery from the motherboard and carefully lift it out of the device.
• Fit the new battery in the phone, connect to the motherboard, and reassemble your device.

Motherboard

• Open the device and disconnect all connected components from the motherboard.
• Remove the screws holding the motherboard and lift it out of the device.
• Place the new motherboard in and reattach all the components. Secure it with the screws and reassemble your device.

Note: Ensure that you use appropriate tools for these procedures to prevent possible damage to the device.