Nokia 2.4 Repuestos Technical Characteristics
This section outlines the technical specifications of the common replaceable parts of the Nokia 2.4 smartphone. Emphasis will be laid on the screen, the battery, and the charging port.
Screen
- Type: IPS LCD
- Size: 6.5 inches, 102.0 cm2
- Resolution: 720 x 1600 pixels
Battery
Nokia 2.4 Repuestos Technical Characteristics
This section outlines the technical specifications of the common replaceable parts of the Nokia 2.4 smartphone. Emphasis will be laid on the screen, the battery, and the charging port.
Screen
- Type: IPS LCD
- Size: 6.5 inches, 102.0 cm2
- Resolution: 720 x 1600 pixels
Battery
- Type: Li-Po 4500 mAh, non-removable
- Charging: Charging 10W
Charging Port
Instructions for Nokia 2.4 Repuestos Replacement
Screen Replacement
For a broken or faulty screen, follow these steps carefully to replace it:
- Power off the device and remove the SIM tray.
- Use a prying tool to remove the back cover from the bottom.
- Remove the screws securing the metal plate over the battery connector and disconnect the battery.
- Remove the remaining screws to remove the motherboard.
- Disconnect the screen connector and carefully remove the screen.
- Replace the screen and reconnect the screen connector. Then reassemble the device in reverse order.
Battery Replacement
If your battery is not holding charge as expected, follow the steps below to replace it:
- Power off your device and remove the SIM tray.
- Use a prying tool to take off the back cover from the bottom.
- Remove the screws securing the metal plate over the battery connector, then disconnect the connector.
- Carefully pry the battery up without damaging any nearby components and replace it.
- Reconnect the battery connector, screw the metal plate back into place, and reassemble the device.
Charging Port Replacement
If your device is not charging, the charging port might be faulty. Follow these steps to replace it:
- Power off your device and remove the SIM tray.
- Use a prying tool to take off the back cover from the bottom.
- Remove the screws around the charging port.
- Carefully lift the charging port out without damaging any ribbon cables. Replace it with a new one.
- Screw the new charging port securely and reassemble the device.
Less