Nokia 9 Pureview 2019 spare parts
There are 13 products.Nokia 9 Pureview 2019 Repuestos - Technical Characteristics
The Nokia 9 Pureview 2019 is an advanced smartphone packed with impressive features suitable for modern demands. Below are its technical details and replacement parts.
Technical Details
- Screen: 5.99 inch P-OLED display, protected by Corning Gorilla Glass 5
- Battery: Non-removable Li-P...
Nokia 9 Pureview 2019 Repuestos - Technical Characteristics
The Nokia 9 Pureview 2019 is an advanced smartphone packed with impressive features suitable for modern demands. Below are its technical details and replacement parts.
Technical Details
- Screen: 5.99 inch P-OLED display, protected by Corning Gorilla Glass 5
- Battery: Non-removable Li-Po 3320 mAh battery
- Processor: Qualcomm Snapdragon 845
- RAM: 6GB
- Storage: 128GB, no microSD slot
- Rear Camera: Five 12 MP, f/1.8 lenses (two RGB, three B/W)
- Front Camera: 20 MP, f/2.0 lens
Replacement Instructions
When it comes to replacement of the Nokia 9 Pureview 2019 parts, it is critical to proceed with caution. Follow the instructions in the exact order for the best outcome.
Tools Required
- ESD-safe tweezers
- Plastic prying tools
- Phillips head screwdriver
- Heating pad or hairdryer
- Gloves
Screen Replacement
To replace the screen of Nokia 9 Pureview, follow the steps below:
- Turn off your device and remove the SIM tray.
- With a heat gun or similar, apply gentle heat to the edges of the screen to soften the adhesive.
- Apply a suction cup to the heated screen surface and lift gently. Insert a plastic prying tool into the gap and slide it around to break the adhesive.
- Slowly lift the screen, but be cautious of the screen flex cable.
- Disconnect the screen flex cable and remove the broken screen.
- Attach the new screen and connect the flex cable.
- Reapply adhesive and firmly press the screen into place.
Battery Replacement
For the battery replacement:
- Remove the screen following the previous steps.
- Locate and unscrew the mid-frame.
- Carefully disconnect the battery’s connector using ESD-safe tweezers.
- With a plastic tool, gently pry out the battery. It is secured lightly with adhesive.
- Install the new battery, connect its terminals, and screw back the mid-frame.
- Reassemble the screen back to its original place.
Please ensure all repairs are conducted in a clean and organized environment to prevent misplacement of screws or other components.
Less More Showing 1 - 13 of 13 items
Available
Out of stock
Disponible
Disponible
Available
Available
Disponible
Available
Disponible
Available
Available
Available
Out of stock