Nokia Asha 200 spare parts

    There are 3 products.

    Nokia Asha 200 Repuestos Technical Characteristics

    The Nokia Asha 200 is a feature phone that was released in 2011. It has several parts that can be replaced or repaired. Here are some key technical details of these parts:

    • Main Display: 2.4 inches, 240 x 320 pixels, TFT, 256K colors
    • Secondary Display: N/A
    • Battery: Removable Li-Ion 1430 mAh (BL...

    Nokia Asha 200 Repuestos Technical Characteristics

    The Nokia Asha 200 is a feature phone that was released in 2011. It has several parts that can be replaced or repaired. Here are some key technical details of these parts:

    • Main Display: 2.4 inches, 240 x 320 pixels, TFT, 256K colors
    • Secondary Display: N/A
    • Battery: Removable Li-Ion 1430 mAh (BL-5J). Stand-by: Up to 890 hours. Talk time: Up to 7 hours. Music play: Up to 52 hours.
    • Memory: Internal: 10 MB, 64 MB ROM, 32 MB RAM. Card slot: microSD, up to 32 GB (dedicated slot)
    • Camera: 2 MP, LED flash. Video: 176x144@10fps
    • Sound: Loudspeaker with 3.5mm jack

    Replacing Nokia Asha 200 Parts

    The following is a basic guide on how to replace key parts of the Nokia Asha 200. Note: Always remember to switch off your device and disconnect from any power source before commencing any form of work on it.

    Replacing the Battery

    • 1. Flip the phone over so that the back cover is facing upwards.
    • 2. Press the latch at the bottom of the phone and lift the cover off.
    • 3. Gently pull the battery out from its compartment.
    • 4. Place the new battery into the compartment, making sure it aligns with the battery connectors.
    • 5. Replace the back cover, ensuring it snaps back into place securely.

    Replacing the Display

    • 1. Remove the back cover and battery as described above.
    • 2. Carefully remove the screws around the edge of the phone's casing using a small screwdriver.
    • 3. Lift the casing off the phone to reveal the display.
    • 4. Carefully detach the old display from its connectors.
    • 5. Attach the new display, ensuring it is securely connected.
    • 6. Replace the phone casing and re-insert the screws.
    • 7. Insert the battery and replace the back cover.

    Please note that repairs should be done by a professional or a person familiar with electronic device repairs. Always take care to ensure that the phone is off and unplugged before any work is done.

    Less
    More
    Showing 1 - 3 of 3 items