Nokia C32 spare parts

    There are 4 products.

    Nokia C32 Technical Characteristics

    The Nokia C32 smartphone comes with several remarkable features and as with all smartphones, may require part replacements over time. Here are the key specifics:

    • Display: 6.5 inches IPS LCD with resolution of 720x1600 pixels
    • OS: Android 11 Go Edition
    • Processor: 1.3 GHz Quad-core Processor
    • RAM: 1GB/2GB
    • S...

    Nokia C32 Technical Characteristics

    The Nokia C32 smartphone comes with several remarkable features and as with all smartphones, may require part replacements over time. Here are the key specifics:

    • Display: 6.5 inches IPS LCD with resolution of 720x1600 pixels
    • OS: Android 11 Go Edition
    • Processor: 1.3 GHz Quad-core Processor
    • RAM: 1GB/2GB
    • Storage: 32GB/64GB, expandable upto 256GB via MicroSD slot
    • Camera: 5MP rear camera and 5MP front camera
    • Battery: 3000mAh removable battery

    Replacing Nokia C32 Repuestos

    Replacement of components should be done with utmost care. Follow these steps to replace parts:

    Equipment Needed

    • Replacement parts
    • Small Phillips-head screwdriver
    • Spudger tool
    • Plastic opening tools

    Disassembly

    Ensure the device is powered off before disassembly.

    • Remove the back cover using a plastic opening tool to pry it off from the small notch at the bottom of the phone.
    • Remove the battery by lifting it up from the bottom indentation.
    • Unscrew all visible screws securing the inner back panel with a Phillips-head screwdriver.
    • Use the spudger tool to unhinge and remove the panel.
    • Disconnect the ribbon connectors for the camera and other parts that need to be replaced.

    Replacement

    With the device open, you can now proceed to replace the faulty component.

    • Remove the faulty part and replace it with the new component.
    • Make sure you securely reattach any disconnected ribbon connectors.

    Reassembly

    After replacing the faulty component, follow these reassembly steps:

    • Reattach the inner panel back and securely fasten it with the screws.
    • Reinsert the battery into its compartment.
    • Snap the back cover into place on the back of the phone.

    Note: Always make sure the device is tested properly to confirm the replaced part is working correctly after reassembly.

    Less
    More
    Showing 1 - 4 of 4 items