Nokia G42 spare parts

    There are 14 products.

    Nokia G42 Technical Specifications

    The Nokia G42 smartphone comes with numerous features and technical specifications that make it stand out among other phones in its range. Here are some of its noteworthy technical characteristics:

    • Display: 6.5 inch with a resolution of 720 x 1600 pixels
    • Processor: Snapdragon 480 5G
    • RAM: 4/6GB
    • Storage...

    Nokia G42 Technical Specifications

    The Nokia G42 smartphone comes with numerous features and technical specifications that make it stand out among other phones in its range. Here are some of its noteworthy technical characteristics:

    • Display: 6.5 inch with a resolution of 720 x 1600 pixels
    • Processor: Snapdragon 480 5G
    • RAM: 4/6GB
    • Storage: 64/128GB, expandable via MicroSD card
    • Camera: 48MP+8MP+5MP rear camera and 8MP front camera
    • Battery: 3000mAh
    • Operating System: Android 10

    Replacing Nokia G42 Spare Parts

    Replacing parts of Nokia G42 requires professional knowledge and tools. Perform these instructions at your own risk.

    Preparation

    Ensure you have the necessary tools - a SIM tool, a plastic opening tool, tweezers, and a 00 Phillips screwdriver. Ensure that your workspace is clean and well-lit. Keep small containers for organizing screws and other small components.

    Turn off Phone

    Before you begin, make sure you have turned off the Nokia G42 to prevent any electrical issues.

    Remove Back Cover

    • Insert the SIM tool into the small hole on the SIM card tray to eject the tray.
    • Use a plastic opening tool to pry open the edges of the back cover. Start from one corner and go around the edges gently, releasing the clips holding the cover.
    • Carefully lift the back cover away from the phone.

    Remove Battery

    • Unscrew the screws holding the battery connector and disconnect the cable.
    • Use tweezers to grip the pull-tab on the battery, and slowly pull it out.

    Replace Component

    Depending on the damaged component, be it the camera, the display, or any other component, appropriately unscrew and remove the faulty component, and replace it with the new part.

    Reassemble

    Once the replacement is complete, reassemble the phone by reversing the disassembly steps. Be gentle and careful not to force any parts into place to avoid further damage.

    Note: This is a brief guide, and certain components may need specific instructions. If you aren't 100% sure of what you are doing, consider professional help to avoid causing permanent damage to your device.

    Less
    More
    Showing 1 - 14 of 14 items