Nokia Lumia 950 spare parts

Nokia Lumia 950 Repuestos Technical Specifications

The Nokia Lumia 950, a product of Nokia Corporation, is renowned for its high-end features and robust functionality. Included among its infrastructure are the following components, which might require replacement after prolonged usage:

• Display: 5.2-inch AMOLED touchscreen, with a resolution of 1440 x 2560 pixels.
• Processor: Qualcomm MSM8992 Snapdragon 808.
• Memory: 32 GB internal storage and 3 GB RAM.
• Battery: Removable Li-Ion 3000 mAh battery (BV-T5E).
• Camera: 20 Megapixels, Zeiss optics, OIS, triple-LED RGB flash.

Instructions for Replacing Nokia Lumia 950 Repuestos

To ensure proper replacement of Lumia 950 repuestos, follow the steps below closely:

Tool Required

You will need a T4 Torx screwdriver, a pair of tweezers and a plastic opening tool to execute a repair.

Disassembling the Phone

• Step 1: Begin by switching off the device to prevent any electronic disruptions.
• Step 2: Remove the back cover of the Lumia 950 by pulling it away from the main body of the phone.
• Step 3: Extract the battery by lifting the designated edge.
• Step 4: Utilize the T4 Torx screwdriver to unscrew the ten screws on the midframe and detach it from the device.

Replacing Specific Components

• Step 5: Access the desired component: memory, processor, camera, etc., and dislodge it gently from its spot.
• Step 6: Replace the faulty part with the new repuesto in the correct orientation.
• Step 7: Lock the replaced part securely in its slot. Ensure it's correctly connected to the phone's functionality.

Reassembling the Phone

• Step 8: Reattach the midframe. This should be done by aligning it correctly and using the T4 Torx screwdriver to reintroduce the previously removed screws.
• Step 9: Insert the battery into its original spot.
• Step 10: Snap the back cover into place.
• Step 11: Power up the device to confirm the successful replacement of components.

Note: Always handle all electronic parts with utmost care to avoid damaging any components during replacement.