Nokia N950 spare parts

Technical Characteristics of Nokia N950 Repuestos

The Nokia N950, a smartphone manufactured by Nokia, comes packed with a variety of technical features. Here are some of the defining characteristics:

• Operating System: Meego 1.2 Harmattan
• Display: 4.0 inch TFT LCD Capacitive Touchscreen
• Resolution: 480 x 854 pixels
• Processor: TI OMAP 3630, 1 GHz
• Memory: 1GB RAM, 64GB internal storage
• Camera: 8 megapixels, Auto focus, dual LED flash
• Battery: 1320 mAh Li-Ion battery
• Connectivity: Wi-Fi 802.11 b/g/n, Bluetooth 2.1, microUSB 2.0
• Sensors: Accelerometer, Proximity, Compass

Instructions on How to Replace Nokia N950 Repuestos

Before you start, ensure you have the necessary tools: a T5 Torx screwdriver, plastic opening tools, and a new spare part.

Step 1: Removing the Back Cover

Switch off the device. Use a plastic opening tool to gently pry the back cover off the phone. Start from the bottom and slide your way up.

Step 2: Removing the Battery

After removing the back cover, locate the battery. Lift the battery out of the phone using the plastic opening tool.

Step 3: Removing the Screws

With T5 Torx screwdriver, unscrew the six screws at the back of the phone. Keep a close watch on these as they are small and easy to lose.

Step 4: Removing the Back Frame

Use the plastic opening tool to carefully lift the back frame off the phone. Start at the top for easier removal. Remember the volume and power buttons will be free once the back frame is removed.

Step 5: Replacing the Damaged Part

Locate the damaged part that needs replacement. Gently remove it with the plastic opening tool. Place the new part where the old one was.

Step 6: Reassembling the Phone

To reassemble, follow these instructions in reverse order: replace the back frame, screw in the screws, place the battery in its slot, and finally snap on the back cover.

Note: Be sure to handle all parts with care to avoid any further damage.