Nokia X20 spare parts
There are 11 products.Nokia X20 Repuestos - Technical Specifications
The Nokia X20 Repuestos come with impressive characteristics that complement the phone's overall performance. Here are the key features:
- Display: 6.67-inch IPS LCD, 1080 x 2400 pixels, 395 PPI density.
- Camera: Quad-camera system: 64MP primary lens, 5MP ultra-wide, 2MP macro, 2MP depth.
...
Nokia X20 Repuestos - Technical Specifications
The Nokia X20 Repuestos come with impressive characteristics that complement the phone's overall performance. Here are the key features:
- Display: 6.67-inch IPS LCD, 1080 x 2400 pixels, 395 PPI density.
- Camera: Quad-camera system: 64MP primary lens, 5MP ultra-wide, 2MP macro, 2MP depth.
- Battery: Li-Ion 4470 mAh, non-removable battery.
- Connectivity: WiFi, Bluetooth 5.0, GPS, NFC, USB Type-C.
- Sound: FM radio, 3.5mm headphone jack.
- OS:Android 11, upgradable to Android 13.
- Processor: Qualcomm SM4350 Snapdragon 480 5G (8 nm).
- Memory: 128GB storage, 6GB RAM.
Instructions on Replacing Nokia X20 Repuestos
Preparation
- Before starting, turn off your Nokia X20 phone to prevent any potential electrical hazard or data loss.
- Prepare the necessary tools such as prying tools, a Phillips head screwdriver, and plastic opening tool.
Opening the Phone
- Using the prying tool, begin separating the back case in the charging port area and make your way around the perimeter.
- You will find several screws securing the back case. Use your Phillips head screwdriver to remove them.
Replacing Components
Please note that the replacement process may vary depending on the part to be replaced (screen, battery, camera, etc.). Always refer to the specific instructions for each part. Here's a general guide:
- Carefully disconnect the related part from the motherboard (could be display cable, battery connector or camera connector).
- Next, remove the component from its seating. If it's glued down, you may need to apply small amounts of heat (with something like a heat gun) to loosen the adhesive.
- Place the new component in the correct seating and carefully reconnect it to the motherboard.
Reassembly
- Ascertain that everything is connected properly, then replace the back case.
- Replace the screws around the perimeter as well as any other place that had screws originally.
- After all the screws are secure, please press firmly around the case's edge to ensure the back adheres properly.
Note that it's always advisable to seek professional help if you're not confident about performing these tasks.
Less More Showing 1 - 11 of 11 items
Disponible
Available
Available
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Available
Available