Nokia XL spare parts

Nokia XL Repuestos Technical Characteristics

The Nokia XLrepuestos, or replacement parts, come with the following technical characteristics:

• Screen: 5.0 inches IPS LCD, 480 x 800 pixels
• Processor: Qualcomm MSM8225 Snapdragon S4 Play
• RAM: 768MB
• Internal Storage: 4GB, expandable via MicroSD up to 32GB
• Battery: 2000mAh (Removable)
• Cameras: Rear - 5MP with flash, Front - 2MP

Instructions for Replacing Nokia XL Repuestos

Tools Needed

• Small Phillips Screwdriver
• Opening Tool
• Tweezers
• Hot air gun (for screen replacement)

Steps for Replacing Nokia XL Repuestos

Note: Be sure to power off your Nokia XL smartphone before beginning any kind of repairs. Any opposite action can harm your device.

Step 1: Removing the Back Cover and Battery

Use the opening tool to gently pry off the back cover. Remove the battery by lifting it from the notch at the bottom right corner.

Step 2: Removing the Screws

Use your Phillips screwdriver to remove the 6 screws securing the back frame.

Step 3: Removing the Back Frame

Use the opening tool to detach the back frame. Start from the top corner and slide the opening tool around the sides to release all the clips.

Step 4: Removing the motherboard

Disconnect the three flex cables connected to the motherboard using tweezers. Carefully lift the motherboard out of the case.

Step 5: Replacing the part

Depending on the repuesto, this step will be different. If it is a screen repuesto, use the hot air gun to soften the adhesive and remove the old screen. Apply new adhesive and install the new screen. If it is a battery replacement, simply replace the old battery with the new one. For other parts, remove the old part and install the new one in its place.

Step 6: Reassembly

Once the replacement part has been installed, simply follow steps 1 to 4 in reverse order to reassemble your Nokia XL.

That's it! You've successfully replaced your Nokia XL repuestos.