Oneplus 10 Pro spare parts

Technical Characteristics of OnePlus 10 Pro Repuestos

The OnePlus 10 Pro is a state-of-the-art smartphone featuring a range of high-end components. Below are the primary repuestos (replacement parts) available for the OnePlus 10 Pro:

• Display: 6.7-inch AMOLED, 1440 x 3216 pixels
• Battery: 5,000mAh, non-removable
• Camera Module: Triple-lens setup (48MP, 50MP, 8MP)
• Motherboard: Snapdragon 8 Gen 1 chipset
• Charging Port: USB-C 3.1 port
• Back Cover: Available in multiple finishes
• Speaker: Stereo speakers

Instructions to Replace OnePlus 10 Pro Repuestos

Replacing parts on the OnePlus 10 Pro requires meticulous attention to detail and careful handling. Follow the instructions below to replace different repuestos of the OnePlus 10 Pro:

1. Display Replacement

• Turn off the device and remove the SIM card tray.
• Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover.
• Carefully pry open the back cover using a plastic pry tool.
• Disconnect the battery connector and then the display connector from the motherboard.
• Remove screws securing the display assembly and carefully detach the old display from the frame.
• Place the new display in position and reconnect the display connector to the motherboard.
• Reattach the battery connector and secure the back cover with appropriate adhesive.
• Power on the device to ensure the new display is functioning properly.

2. Battery Replacement

• Turn off the device and remove the SIM card tray.
• Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover.
• Carefully pry open the back cover using a plastic pry tool.
• Disconnect the battery connector from the motherboard.
• Use a plastic tool to gently lift the battery, taking care not to puncture it.
• Place the new battery in position and reconnect the connector to the motherboard.
• Secure the back cover with appropriate adhesive and power on the device to ensure it is functioning properly.

3. Camera Module Replacement

• Turn off the device and remove the SIM card tray.
• Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover.
• Carefully pry open the back cover using a plastic pry tool.
• Disconnect the battery connector from the motherboard.
• Unscrew and disconnect the camera module connectors from the motherboard.
• Carefully remove the old camera module and replace it with the new one.
• Reconnect the camera module connectors and battery connector to the motherboard.
• Secure the back cover with appropriate adhesive and power on the device to ensure the new camera module is functioning properly.