Display lcd by Oneplus 10 Pro with black touch screen with green frame premium quality

Remanufactured premium screen for OnePlus 10 Pro with black touch and green frame (NE2210 NE2211 NE2213 NE2215)

Complete screen module with touch for OnePlus 10 Pro (technical models NE2210 NE2211 NE2213 NE2215) in remanufactured premium quality, designed to restore the visual experience and touch response of the device after glass breakage, image issues, or loss of sensitivity. Supplied in black with an integrated green frame, it facilitates alignment, adds structural rigidity, and speeds up installation during workshop repairs. This version is intended for professional interventions where an optimal balance between visual quality, correct physical fit, and cost control is required, with cold testing recommended before final closure to verify full module operation.

Key features
• Complete screen plus touch for OnePlus 10 Pro
• Remanufactured premium quality
• Black color with integrated green frame
• Fit designed for technical models NE2210 NE2211 NE2213 NE2215
• Prepared for cold testing and verification before device closure

Remanufactured premium quality provides a visual experience close to the original panel, with good sharpness, balanced contrast, uniform brightness, and stable touch response. This type of module maintains appropriate thickness and correct seating within the frame, supporting clean chassis closure and reducing flex stress during assembly. It is a suitable solution for workshops aiming to minimize post-repair issues and deliver a reliable result for daily use. For optimal results, it is recommended to check image uniformity, touch zones, and correct frame fit before final closure. Available for immediate dispatch from Spain.

Installation tips

1. Disconnect the battery and use ESD protection before starting the replacement.

2. Place the screen and perform a complete cold test before closing the chassis.

3. Align connectors without forcing and verify that they are not folded or under tension.

4. Replace adhesives, clean residues, and ensure uniform sealing.

5. Check brightness, color, touch response, and overall device operation.

6. Apply uniform pressure for 20 to 30 minutes after sealing to stabilize the assembly.

Technical table