OnePlus 10R spare parts

OnePlus 10R Repuestos: Technical Characteristics and Replacement Instructions

Technical Characteristics of OnePlus 10R Repuestos

The OnePlus 10R is equipped with a range of components, or repuestos, designed for high performance and durability. Below are the key technical characteristics:

• Battería: 4500mAh, 65W SuperVOOC fast charging.
• Processor: MediaTek Dimensity 1200-AI Processor.
• Screen: 6.7-inch Fluid AMOLED Display, 120Hz Refresh Rate.
• Camera: Rear - 50MP + 8MP + 2MP, Front - 16MP.
• RAM: 12GB LPDDR4X.
• Storage: 256GB UFS 3.1.
• Operating System: OxygenOS based on Android 12.

Instructions for Replacing OnePlus 10R Repuestos

Below are the detailed steps for replacing the most common OnePlus 10R repuestos:

Replacing the Screen

• Step 1: Turn off the phone and remove the SIM card tray.
• Step 2: Heat the edges of the screen with a heat gun to soften the adhesive.
• Step 3: Use a suction cup and a plastic pry tool to carefully separate the screen from the frame.
• Step 4: Disconnect the ribbon cables connecting the screen to the motherboard.
• Step 5: Attach the new screen by reconnecting the ribbon cables and placing it on the frame.
• Step 6: Press the screen onto the frame until secure and reassemble the phone.

Replacing the Battery

• Step 1: Power off the phone and remove the back cover using a suction cup and pry tool.
• Step 2: Unscrew the screws holding the battery cover and remove it.
• Step 3: Disconnect the battery connector from the motherboard and remove the battery.
• Step 4: Insert the new battery, reconnect the connector, and replace the battery cover and screws.
• Step 5: Reattach the back cover and power on the phone.

Replacing the Camera Module

• Step 1: Turn off the phone and remove the back cover.
• Step 2: Unscrew and remove the camera module cover.
• Step 3: Disconnect the camera module connector and carefully remove the module.
• Step 4: Install the new camera module by reconnecting the connector and securing it with screws.
• Step 5: Replace the camera module cover and reattach the back cover.

Final Tips

Always ensure that the phone is turned off before performing any replacements. Use ESD-safe tools to prevent damage to the electronic components. Follow the steps in the exact order to avoid missing any critical part of the process.