Oneplus 5T

Technical Characteristics of OnePlus 5T

Released: November 2017

Display: 6.01 inches, Optic AMOLED, 1080 x 2160 pixels

Operating System: Android 7.1.1 (Nougat), upgradable to Android 10.0

Chipset: Qualcomm MSM8998 Snapdragon 835 (10 nm)

CPU: Octa-core (4x2.45 GHz Kryo & 4x1.9 GHz Kryo)

GPU: Adreno 540

Memory: 6GB RAM + 64GB internal storage, 8GB RAM + 128GB internal storage

Camera: Dual 16 MP, f/1.7, 20 MP, f/1.7

Battery: Non-removable Li-Po 3300 mAh

SIM: Dual SIM (Nano-SIM, dual stand-by)

Instructions to Replace OnePlus 5T

Step-by-Step Guide

• Step 1: Power off your OnePlus 5T and eject the SIM card tray using a SIM ejector tool.
• Step 2: Remove the back cover of the phone. This can be done by gently prying it open using a plastic opening tool. Be careful not to damage the clips holding the cover.
• Step 3: Unscrew the screws securing the metal shield over the motherboard. Use a small Phillips screwdriver to remove these screws.
• Step 4: Carefully disconnect the battery connector from the motherboard with the help of a plastic spudger.
• Step 5: Remove the screws securing the battery and gently pry the battery up from the adhesive. Take care not to puncture the battery.
• Step 6: Disconnect the other ribbon cables connected to the motherboard, including those for the display and fingerprint sensor.
• Step 7: Unscrew and carefully remove the motherboard. Be cautious of any remaining connectors or components attached to it.
• Step 8: If you are replacing the display, unscrew and remove the old display assembly. Make sure to clean off any adhesive residue.
• Step 9: Install the new display assembly by securing it with screws and reconnecting the ribbon cables.
• Step 10: Place the motherboard back into the phone and secure it with screws. Reconnect the ribbon cables and battery connector.
• Step 11: Replace the metal shield over the motherboard and screw it in place.
• Step 12: Place the back cover onto the phone and press it firmly to ensure all clips are secured.
• Step 13: Power on the phone to check if all components are functioning correctly. Reinsert the SIM card tray.

Warning: Performing these steps may void your warranty. Proceed with caution and ensure you have the necessary tools and experience to carry out these instructions. If unsure, seek help from a professional technician.