touch screen oneplus

Technical Characteristics of Pantalla Táctil OnePlus

Display Features

Type: AMOLED

Size: 6.55 inches

Resolution: 1080 x 2400 pixels

Protection: Corning Gorilla Glass 5

Refresh Rate: 90Hz

HDR10+: Supported

Instructions to Replace Pantalla Táctil OnePlus

Tools Required

• Plastic opening tools
• Suction cup
• Small Phillips screwdriver
• Tweezers
• Adhesive strips
• Heat gun or hair dryer
• Isopropyl alcohol (optional)
• Anti-static wrist strap (optional)

Step-by-Step Instructions

Step 1: Power Off the Device

Ensure the OnePlus device is completely turned off before beginning the replacement process.

Step 2: Remove the Back Cover

Use a heat gun or hair dryer to gently heat the edges of the back cover. This softens the adhesive, making it easier to remove. Carefully use a suction cup and plastic opening tools to pry the back cover from the device.

Step 3: Disconnect the Battery

Use a small Phillips screwdriver to remove the screws securing the protective cover over the battery connector. Once the cover is removed, use tweezers or a plastic tool to disconnect the battery from the motherboard.

Step 4: Remove the Screen

Use the heat gun or hair dryer to heat the edges of the screen. Gently use the plastic opening tools to separate the screen from the frame. Be cautious not to damage the ribbon cable connecting the screen to the motherboard.

Step 5: Disconnect the Screen Ribbon Cable

Carefully lift the screen and locate the ribbon cable connector. Use a plastic tool or tweezers to disconnect the ribbon cable from the motherboard.

Step 6: Install the New Screen

Connect the new screen's ribbon cable to the motherboard. Ensure the connection is secure.

Step 7: Attach the New Screen

Carefully align the new screen with the frame. Press gently around the edges to secure the adhesive. If necessary, use additional adhesive strips to ensure the screen is firmly attached.

Step 8: Reconnect the Battery

Reconnect the battery connector to the motherboard. Replace the protective cover and secure it with screws.

Step 9: Replace the Back Cover

Align the back cover with the device and press firmly around the edges. Use the heat gun or hair dryer to warm the adhesive and ensure a secure fit.

Step 10: Power On the Device

Turn on the OnePlus device to ensure the new pantalla táctil is functioning correctly. Test touch responsiveness and display clarity.

Step 11: Final Check

Verify that all components are secure and there are no loose parts. If everything is in order, the replacement process is complete.