Oppo A76 CPH2375 spare parts

Technical Characteristics of Oppo A76 CPH2375 Repuestos

The Oppo A76 CPH2375 comes with various replaceable parts, commonly referred to as repuestos. Below are the technical characteristics of these components:

Display

• Type: IPS LCD
• Size: 6.56 inches
• Resolution: 720 x 1612 pixels
• Protection: Gorilla Glass 3+

Battery

• Type: Li-Po, non-removable
• Capacity: 5000mAh
• Charging: 33W Fast Charge

Camera Modules

• Main Camera: Dual 13 MP + 2 MP
• Front Camera: 8 MP

Internal Components

• Processor: Snapdragon 680
• RAM: 4GB or 6GB
• Storage: 128GB
• Operating System: Android 11, ColorOS 11.1

Instructions for Replacing Oppo A76 CPH2375 Repuestos

Follow the detailed instructions below to replace components (repuestos) of the Oppo A76 CPH2375:

1. Preparation

• Power off the device.
• Use a SIM card ejector tool to remove the SIM card tray.
• Gather all necessary tools (e.g., Phillips screwdriver, plastic opening tools, tweezers).

2. Removing the Back Cover

• Use a plastic opening tool to carefully pry the back cover off the phone. Start from the edges and work your way around.
• Once loosened, gently lift and remove the back cover completely.

3. Disconnecting the Battery

• Locate the battery connector on the motherboard.
• Use a plastic spudger to carefully disconnect the battery connector.
• Ensure there is no power running through the device to avoid short circuits.

4. Replacing the Display

• Remove any screws securing the display assembly to the frame.
• Use a heat gun to soften the adhesive around the display edges.
• Gently pry the display from the frame using opening tools.
• Disconnect the display flex cable from the motherboard.
• Replace with the new display and reconnect the flex cable.
• Secure the new display to the frame with screws and any adhesive.

5. Replacing the Battery

• Locate and remove any screws or adhesive strips securing the battery.
• Gently lift the battery out of its compartment using a plastic tool.
• Insert the new battery into the compartment.
• Reconnect the battery connector to the motherboard.

6. Replacing the Camera Modules

• Locate the camera modules on the motherboard.
• Disconnect the camera connectors carefully using a plastic spudger.
• Remove the old camera modules from their slots.
• Insert the new camera modules into the respective slots.
• Reconnect the camera connectors to the motherboard.

7. Reassembling the Phone

• Ensure all components are securely in place and properly connected.
• Reattach the back cover to the phone frame.
• Press along the edges to snap the back cover into place.
• Reinsert the SIM card tray.
• Power on the device to check if everything is functioning correctly.

If you encounter any issues during the replacement process, consult a professional repair technician for assistance.