Battery BLP885 by Oppo A76 Oppo A96 4200010 Service Pack

BLP885 Battery for Oppo A76 Oppo A96 4G 4200010 Service Pack

BLP885 battery for Oppo A76 and Oppo A96 4G with technical models CPH2375 and CPH2333 in Service Pack quality, designed to replace a degraded, swollen battery, with low autonomy or charging faults. This spare part corresponds to reference 4200010 and maintains direct integration with the device power system, respecting the internal format, connector and electrical parameters required for a safe repair. It is a part intended to recover the daily autonomy of the phone, stabilize energy consumption and prevent unexpected shutdowns caused by chemical wear of the battery. Designed for professional installation, it requires prior checking of charge, connection and consumption before the final closing of the chassis.

Key features

BLP885 battery for Oppo A76 and Oppo A96 4G.

Compatible with technical models CPH2375 and CPH2333.

Part reference 4200010.

Nominal capacity of 4880 mAh.

Voltage of 3.87 V.

Lithium polymer technology.

Service Pack quality for professional repair.

Suitable for autonomy faults, irregular charging, shutdowns or swollen battery.

Advantages and quality

Service Pack quality offers precise fitting and direct compatibility with the indicated models, reducing incidents during assembly and improving reliability after repair. Its 4880 mAh capacity allows stable energy performance to be recovered in phones with a worn battery, especially when the device shows fast discharge, restarts, shutdowns with remaining percentage or intermittent charging problems. It is a suitable spare part for repair shops looking for a reliable part, with compatible connector and stable electrical behavior. Before closing, it is recommended to verify the charge percentage, perform a consumption test, check charger response and confirm that there is no abnormal overheating. Available for immediate shipping from Spain.

Installation tips

1. Always disconnect the old battery before handling internal connectors.
2. Use ESD protection and suitable tools to avoid board damage.
3. Remove the old adhesive without puncturing or bending the battery.
4. Check the BLP885 connector before fixing the battery to the chassis.
5. Perform a charging and power on test before final closing.
6. Verify temperature, consumption and stability during the first minutes.
7. Replace the internal adhesives if they have lost fixing strength.

Technical table