Oppo A93 4G spare parts

Technical Characteristics of Oppo A93 4G Parts

The Oppo A93 4G is a sophisticated smartphone with various replaceable components. Below are the key technical characteristics of its parts:

Screen

• Type: AMOLED
• Size: 6.43 inches
• Resolution: 1080 x 2400 pixels
• Protection: Corning Gorilla Glass 3

Battery

• Type: Li-Po, non-removable
• Capacity: 4000 mAh
• Charging: Fast charging 18W

Camera

• Main Camera: Quad 48 MP, 8 MP, 2 MP, 2 MP
• Front Camera: Dual 16 MP, 2 MP

Storage

• Internal: 128 GB
• Expandable: microSDXC (uses shared SIM slot)

Instructions on Replacing Oppo A93 4G Parts

Replacing the Screen

1. Power off the device and remove the SIM tray.

2. Use a heat gun to soften the adhesive around the edges of the screen.

3. Use a suction cup and a plastic pry tool to carefully separate the screen assembly from the frame.

4. Disconnect the screen connectors from the motherboard.

5. Remove the old screen and replace it with the new one by connecting the screen connectors back to the motherboard.

6. Reassemble the device by securing the new screen with adhesive and placing the SIM tray back.

Replacing the Battery

1. Power off the device and remove the SIM tray.

2. Remove the back cover using a plastic pry tool.

3. Unscrew and remove the battery shield.

4. Disconnect the battery connector from the motherboard.

5. Carefully remove the old battery using a plastic tool to lift it out.

6. Place the new battery in position and reconnect the battery connector to the motherboard.

7. Reassemble by securing the battery shield back in place, reattaching the back cover, and inserting the SIM tray.

Replacing the Camera

1. Power off the device and remove the SIM tray.

2. Remove the back cover using a plastic pry tool.

3. Disconnect the camera connectors from the motherboard.

4. Carefully remove the old camera modules.

5. Place the new camera modules in position and reconnect the camera connectors to the motherboard.

6. Reassemble by reattaching the back cover and inserting the SIM tray.

Replacing the Storage

1. Power off the device and remove the SIM tray.

2. Remove the back cover using a plastic pry tool.

3. Locate the storage module on the motherboard.

4. Disconnect the storage module from the motherboard.

5. Carefully remove the old storage module.

6. Place the new storage module in position and reconnect it to the motherboard.

7. Reassemble by reattaching the back cover and inserting the SIM tray.