Oppo A96 5G PFUM10 spare parts

Technical Characteristics of Oppo A96 5G PFUM10 Repuestos

The Oppo A96 5G is a mid-range smartphone known for its excellent performance, sleek design, and impressive display. Below are the key technical specifications of Oppo A96 5G PFUM10 repuestos:

Key Specifications

• Model Number: PFUM10
• Screen Size: 6.43 inches
• Display Type: OLED, 1B colors, 430 nits (typ), 600 nits (HBM)
• Resolution: 1080 x 2400 pixels
• Operating System: Android 11, ColorOS 11.1
• Chipset: Qualcomm SM6375 Snapdragon 695 5G (6 nm)
• CPU: Octa-core (2x2.2 GHz Kryo 660 Gold & 6x1.7 GHz Kryo 660 Silver)
• GPU: Adreno 619
• RAM: 8GB
• Internal Storage: 128GB/256GB
• Primary Camera: Dual 48 MP, f/1.7, 26mm (wide), PDAF, 2 MP, f/2.4, (depth)
• Front Camera: 16 MP, f/2.4, 27mm (wide)
• Battery: Non-removable Li-Po 4500 mAh battery
• Charging: Fast charging 33W

Instructions for Replacing Oppo A96 5G PFUM10 Repuestos

Replacing parts on your Oppo A96 5G requires careful handling and attention to detail. Follow the steps below to safely replace components:

Tools Needed:

• Pentalobe screwdriver
• Phillips screwdriver
• Plastic opening tools
• Suction cup
• Tweezers
• Adhesive strips
• Anti-static wrist strap (recommended)

Step-by-Step Instructions:

Step 1: Power Off the Device

Make sure to power off your Oppo A96 5G before beginning any repair. This helps to prevent any electrical short circuits.

Step 2: Remove the SIM Card Tray

Using the SIM ejector tool, remove the SIM card tray from the device.

Step 3: Remove the Back Cover

Apply heat around the edges of the back cover using a heat gun or a hair dryer. This will loosen the adhesive. Use a suction cup to gently lift the back cover while using plastic opening tools to separate it from the device. Be careful not to damage the fingerprint sensor cable if present.

Step 4: Disconnect the Battery Connector

Locate the battery connector and use the plastic opening tool to disconnect it. It's important to disconnect the battery before proceeding to other components.

Step 5: Remove the Screws

Using the Phillips screwdriver, remove all screws securing the internal components. Keep the screws organized as they can vary in size.

Step 6: Disconnect and Remove Damaged Components

Carefully disconnect any flex cables using tweezers and plastic opening tools. Remove the damaged components you intend to replace (e.g., screen, camera, battery). Take note of the placement of each component.

Step 7: Install the New Components

Gently place the new components into the designated areas. Connect all flex cables and ensure they are secure. Replace all screws and components in the reverse order of disassembly.

Step 8: Reconnect the Battery

Reconnect the battery connector using the plastic opening tool.

Step 9: Reattach the Back Cover

Apply new adhesive strips around the edges of the back cover. Carefully align and press the back cover onto the device. Apply gentle pressure to ensure the adhesive bonds properly.

Step 10: Power On and Test

Power on your Oppo A96 5G and test the newly installed components to ensure everything is functioning correctly.

By following these instructions, you can successfully replace components on your Oppo A96 5G PFUM10. Always exercise caution and take your time to avoid damaging any parts.