Oppo Find 5 spare parts

Technical Characteristics of Oppo Find 5 Repuestos

Screen Replacement

Type: LCD capacitive touchscreen, 16M colors

Size: 5.0 inches, 68.9 cm2 (~65.9% screen-to-body ratio)

Resolution: 1080 x 1920 pixels, 16:9 ratio (~441 ppi density)

Battery Replacement

Type: Non-removable Li-Ion 2500 mAh battery

Camera Replacement

Primary: 13 MP, f/2.2, AF, LED flash, HDR, panorama

Secondary: 1.9 MP, 720p

Instructions for Replacing Oppo Find 5 Repuestos

Screen Replacement Instructions

• Power off your Oppo Find 5 completely.
• Remove the SIM card tray using an ejector tool.
• Use a heat gun or a hairdryer to warm the edges of the screen, loosening the adhesive.
• Carefully insert a plastic pry tool between the screen and the frame. Gently separate the screen from the frame.
• Disconnect the screen cables from the motherboard.
• Remove the old screen and replace it with the new one, reconnecting all cables and ensuring they are properly affixed.
• Gently press the new screen onto the frame, ensuring it adheres properly.
• Reinsert the SIM card tray and power on the device to test the new screen.

Battery Replacement Instructions

• Power off your Oppo Find 5 and remove the SIM card tray using an ejector tool.
• Use a screwdriver to remove the screws securing the back cover.
• Use a plastic pry tool to carefully loosen and remove the back cover.
• Disconnect the battery connector from the motherboard.
• Use a spudger to gently pry the battery out of its compartment, being careful not to puncture the battery.
• Insert the new battery into the compartment and reconnect the battery connector to the motherboard.
• Replace the back cover and secure it using the screws removed earlier.
• Reinsert the SIM card tray and power on the device to test the new battery.

Camera Replacement Instructions

Primary Camera Replacement

• Power off your Oppo Find 5 and remove the SIM card tray using an ejector tool.
• Remove the back cover by unscrewing the screws and using a plastic pry tool to lift the cover.
• Locate the primary camera module on the motherboard.
• Disconnect the camera connector and gently remove the old camera module.
• Align and insert the new camera module, securing the connector back into place.
• Reattach the back cover and secure it with the screws.
• Reinsert the SIM card tray and power on the device to test the new camera.

Secondary (Front) Camera Replacement

• Power off your Oppo Find 5 and remove the SIM card tray using an ejector tool.
• Remove the back cover by removing the screws and using a plastic pry tool to lift the cover.
• Locate the secondary camera module on the motherboard.
• Disconnect the camera connector and gently remove the old camera module.
• Align and insert the new camera module, securing the connector back into place.
• Reattach the back cover and secure it with the screws.
• Reinsert the SIM card tray and power on the device to test the new camera.

Follow these steps carefully to ensure proper replacement of your Oppo Find 5 repuestos. Always use quality replacement parts and tools to avoid damaging your device.