Oppo Find 7 spare parts

Oppo Find 7 Spare Parts (Repuestos)

The Oppo Find 7 is a high-performance smartphone known for its sleek design and robust features. If your device encounters any issues, replacing certain parts can extend its lifespan. Below are the technical characteristics of the Oppo Find 7 spare parts and detailed instructions on how to replace them.

Technical Characteristics

• Screen: 5.5-inch Quad HD IPS LCD
• Battery: Li-Po 3000mAh, removable
• Camera: 13 MP rear, 5 MP front
• Storage: 32GB internal, expandable up to 128GB via microSD
• RAM: 3GB
• Processor: Qualcomm Snapdragon 801

Instructions for Replacing Oppo Find 7 Spare Parts

1. Replacing the Screen

• Turn off your Oppo Find 7 and remove the back cover and battery.
• Use a small Phillips screwdriver to remove the screws securing the mid-frame.
• Carefully pry open the mid-frame using a plastic opening tool.
• Disconnect the ribbon cables connected to the motherboard.
• Gently remove the broken screen from the front panel.
• Attach the new screen by connecting the ribbon cables back to the motherboard.
• Reassemble the mid-frame and secure it with screws.
• Reinsert the battery and back cover, then power on your device to test the new screen.

2. Replacing the Battery

• Power off your device and remove the back cover.
• Take out the battery by gently lifting it from the compartment.
• Insert the new battery, ensuring it fits securely in place.
• Replace the back cover and turn on your device to check the new battery's functionality.

3. Replacing the Camera Module

• Switch off your Oppo Find 7 and remove the battery and back cover.
• Remove the screws holding the mid-frame using a Phillips screwdriver.
• Carefully disconnect the camera module ribbon cable from the motherboard.
• Remove the faulty camera module.
• Connect the new camera module to the motherboard.
• Reassemble the mid-frame and secure all screws.
• Reinsert the battery and back cover, then power on your device to ensure the camera is working correctly.

4. Replacing the MicroSD Slot

• Turn off the device and remove the back cover and battery.
• Unscrew and remove the mid-frame using a Phillips screwdriver.
• Locate the microSD slot on the motherboard and disconnect it carefully.
• Remove the faulty microSD slot and replace it with a new one.
• Secure the new microSD slot by reconnecting it to the motherboard.
• Reassemble the mid-frame, replace the screws, and reinsert the battery and back cover.
• Turn on your Oppo Find 7 to test the new microSD slot functionality.

Following these detailed instructions should help you successfully replace various parts of your Oppo Find 7. Always handle components and tools with care to avoid damage.