Oppo N3 spare parts

Technical Characteristics of Oppo N3 Repuestos

Display

Screen Size: 5.5 inches

Resolution: 1080 x 1920 pixels

Type: IPS LCD capacitive touchscreen

Battery

Type: Li-Po 3000 mAh, non-removable

Camera

Main Camera: 16 MP, motorized rotating, f/2.2, 1/2.3", Schneider-Kreuznach optics, dual-LED flash, panorama

Processor

Chipset: Qualcomm MSM8974AA Snapdragon 801

CPU: Quad-core 2.3 GHz Krait 400

GPU: Adreno 330

Memory

Internal: 32GB, 2GB RAM

Card Slot: microSD, up to 256GB (uses SIM 2 slot)

Operating System

OS: Android 4.4.4 (KitKat), upgradable to 5.0 (Lollipop)

Instructions for Replacing Oppo N3 Repuestos

Required Tools

• Pentalobe screwdriver
• Phillips screwdriver
• Pry tools
• Plastic card
• Tweezers
• Adhesive strips
• Heat gun
• Suction cup tool

Battery Replacement

1. Power off the Oppo N3 completely before starting the replacement process.
2. Remove the SIM card tray using a SIM eject tool or a small pentalobe screwdriver.
3. Use a heat gun to warm up the back cover edges for about 2-3 minutes. This will loosen the adhesive.
4. Employ a suction cup tool to gently pull up the back cover. Slide a plastic card or pry tool around the edges to detach the cover from the adhesive. Be careful not to damage the internal components.
5. Once the back cover is removed, locate the battery connector and disconnect it using a pair of tweezers or a plastic pry tool.
6. Remove the screws securing the battery and carefully lift it out. If there is an adhesive strip below the battery, pull it out gently to release the battery.
7. Place the new battery into the compartment and secure it with screws. Connect the battery connector back to its port.
8. Reassemble the back cover by aligning it properly and pressing it firmly into place. If necessary, reheat the adhesive strip to ensure it sticks properly.
9. Insert the SIM card tray back into the device.
10. Power on the Oppo N3 to check if the new battery is functioning correctly.

Screen Replacement

1. Power off the device and remove the SIM card tray.
2. Heat the front of the screen using a heat gun for about 2-3 minutes to loosen the adhesive.
3. Use a suction cup to lift the screen slightly and insert a plastic card between the screen and frame. Carefully slide the card around the edges to separate the screen from the frame.
4. Disconnect the display connectors gently using a plastic pry tool.
5. Carefully remove the damaged screen.
6. Align the new screen and connect the display connectors. Ensure they are securely attached.
7. Gently press the new screen into place. Apply slight pressure around the edges to ensure the screen adheres properly.
8. Insert the SIM card tray back into the device.
9. Power on the Oppo N3 to confirm the new screen is working.

Following these steps will help you successfully replace the battery and screen of your Oppo N3. Always proceed with caution and handle the internal components with care to avoid any damage.