Oppo R3 spare parts

Technical Characteristics of Oppo R3 Repuestos

Here are the technical characteristics of the most common Oppo R3 spare parts:

1. Display Assembly

• Size: 5.0 inches
• Type: IPS LCD capacitive touchscreen, 16M colors
• Resolution: 720 x 1280 pixels (~294 ppi pixel density)

2. Battery

• Capacity: 2410 mAh
• Type: Li-Ion non-removable battery

3. Rear Camera

• Resolution: 8 MP, autofocus, LED flash
• Video: 1080p@30fps

4. Front Camera

• Resolution: 5 MP
• Features: 720p video recording

5. Motherboard

• Chipset: Qualcomm Snapdragon 400
• CPU: Quad-core 1.6 GHz Cortex-A7
• GPU: Adreno 305

6. Charging Port

• Type: MicroUSB 2.0

Instructions to Replace Oppo R3 Repuestos

Follow these detailed steps to replace various parts of your Oppo R3:

1. Replacing the Display Assembly

• Power off the phone and remove the SIM card tray.
• Use a plastic opening tool to pry open the back cover gently.
• Unscrew all the screws holding the middle frame in place.
• Detach the battery and disconnect all the flex cables carefully.
• Remove the damaged display assembly from the frame.
• Install the new display assembly and reconnect all the flex cables.
• Place the battery back and screw the middle frame into place.
• Reattach the back cover and insert the SIM card tray.
• Power on the phone to check the new display.

2. Replacing the Battery

• Power off the phone and remove the back cover using a plastic opening tool.
• Unscrew the screws holding the battery cover in place.
• Disconnect the battery connector and gently pry the battery out using a plastic tool.
• Place the new battery in the compartment and reconnect the battery connector.
• Screw the battery cover back in place.
• Reattach the back cover and power on the phone to check the new battery.

3. Replacing the Rear Camera

• Power off the phone and remove the back cover and battery cover.
• Disconnect the camera flex cable from the motherboard.
• Remove the old rear camera module from its socket.
• Install the new rear camera module and reconnect the flex cable.
• Attach the battery cover and back cover.
• Power on the phone and check the new rear camera functionality.

4. Replacing the Charging Port

• Power off the phone and remove the back cover and battery cover.
• Disconnect the flex cables and unscrew the screws holding the charging port board.
• Remove the old charging port board carefully.
• Install the new charging port board and screw it into place.
• Reconnect all the flex cables.
• Attach the battery cover and back cover.
• Power on the phone and check if the new charging port is working correctly.