Oppo R7 spare parts

Oppo R7 Repuestos Technical Characteristics

The Oppo R7 is a well-crafted smartphone known for its sleek design and powerful performance. When it comes to repairs, it’s important to use high-quality replacement parts (repuestos) to maintain the phone’s functionality and longevity. Below are the technical characteristics of the common repuestos for the Oppo R7:

1. Display Assembly

• Type: AMOLED capacitive touchscreen
• Size: 5.0 inches
• Resolution: 1080 x 1920 pixels
• Protection: Corning Gorilla Glass 3

2. Battery

• Type: Non-removable Li-Po
• Capacity: 2320 mAh

3. Camera

• Rear Camera: 13 MP, f/2.2, LED flash, HDR, panorama
• Front Camera: 8 MP, f/2.4

4. Other Components

• SIM Tray: Dual SIM (Nano-SIM/ Micro-SIM)
• Charger Port: Micro USB
• Audio Jack: 3.5mm

Instructions for Replacing Oppo R7 Repuestos

1. Replacing the Display Assembly

• Power off the device completely.
• Use a SIM ejector tool to remove the SIM tray.
• Remove the back cover using a plastic opening tool to avoid damaging the frame. Be gentle.
• Unscrew all the screws holding the internal frame and carefully detach the frame with a spudger.
• Disconnect the battery connector, display connector, and other flex cables attached to the motherboard.
• Heat the edges of the screen slightly using a heat gun to soften the adhesive.
• Use a suction cup and plastic pry tool to lift and remove the broken display assembly.
• Clean the frame from any adhesive residue and set the new display assembly in place.
• Connect the display and battery connectors back to the motherboard.
• Reassemble the phone by following the steps in reverse order.

2. Replacing the Battery

• Power off the device.
• Remove the SIM tray using the SIM ejector tool.
• Gently remove the back cover with a plastic opening tool.
• Unscrew and remove the internal frame screws.
• Disconnect the battery connector from the motherboard.
• Carefully detach the battery adhesive strips to remove the old battery.
• Set the new battery in place and reconnect the battery connector.
• Reassemble the phone by replacing the internal frame screws and back cover.

3. Replacing the Rear Camera

• Power off the device and remove the SIM tray.
• Remove the back cover and disconnect the battery connector.
• Detach the screws holding the camera module and carefully disconnect it from the motherboard.
• Remove the defective camera and replace it with the new camera module.
• Reconnect and secure the new camera module and battery connector.
• Reassemble the device by replacing the rear cover and SIM tray.

Following these detailed instructions will help ensure the successful replacement of Oppo R7 repuestos.