Oppo Realme 3 Pro repuestos

Technical Characteristics of Oppo Realme 3 Pro Replacement Parts

The Oppo Realme 3 Pro is a robust smartphone equipped with various technical specifications. Here are some crucial components and their characteristics:

1. Display

Type: IPS LCD, capacitive touchscreen, 16M colors
Size: 6.3 inches, 97.4 cm² (~83.7% screen-to-body ratio)
Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~409 ppi density)
Protection: Corning Gorilla Glass 5

2. Battery

Type: Li-Ion 4045 mAh, non-removable
Charging: Fast charging 20W, VOOC 3.0

3. Camera

Back Camera: Dual 16 MP (f/1.7, 1/2.6"", 1.22µm, Dual Pixel PDAF) + 5 MP (f/2.4, depth sensor)
Front Camera: 25 MP, f/2.0, 1/2.8"", 0.9µm

The Oppo Realme 3 Pro uses specific replacement parts adhering strictly to these characteristics to ensure optimal performance after repair.

Instructions on How to Replace Oppo Realme 3 Pro Replacement Parts

1. Display Replacement

• Remove the SIM card tray.
• Unscrew the back cover using a Phillips screwdriver.
• Use a plastic prying tool to gently lift the back cover.
• Disconnect the battery connector to avoid short circuits.
• Unscrew the shield covering the display connector.
• Disconnect the display flex cable from the motherboard.
• Use a heat gun to soften the adhesive around the screen edges.
• Gently apply suction to lift the display from the frame.
• Replace with a new display assembly and reconnect the flex cable.
• Reassemble all parts in reverse order.

2. Battery Replacement

• Turn off the phone and remove the SIM card tray.
• Unscrew and remove the back cover using the appropriate screwdriver.
• Disconnect the battery connector.
• Gently peel off the adhesive strips securing the battery.
• Lift and remove the battery carefully.
• Replace with the new battery and reconnect the connector.
• Reassemble the phone by placing the back cover and screws back in place.

3. Camera Replacement

• Power off the device and remove the SIM card tray.
• Take off the back cover by unscrewing and using a plastic pry tool.
• Disconnect the battery to ensure safety.
• Locate the camera module, unscrew and carefully disconnect it.
• Remove the old camera module and replace it with the new one.
• Reattach the camera connector and screw it back in place.
• Reconnect the battery connector and reassemble the back cover and screws.

Remember to handle all parts gently and ensure components are properly connected to avoid damage. If you are unsure during the repair process, it may be best to consult a professional technician.