Oppo Renno 3 spare parts

Oppo Reno 3 Technical Characteristics:

The Oppo Reno 3 is a mid-range smartphone that boasts impressive specifications, including a sleek design, high-resolution display, and versatile camera system. When it comes to replacement parts (repuestos), understanding these characteristics is crucial for repair:

• Display: 6.4 inches, AMOLED, 1080 x 2400 pixels
• Processor: Mediatek Helio P90
• RAM: 8GB
• Storage: 128GB, expandable via microSD
• Battery: 4025mAh, non-removable, fast charging
• Rear Camera: Quad 48 MP, 13 MP, 8 MP, 2 MP
• Front Camera: 44 MP
• OS: Android 10, upgradeable to Android 11

Instructions for Replacing Oppo Reno 3 Repuestos:

1. Tools Needed:

• Small Phillips head screwdriver
• Plastic pry tool
• Suction cup
• Tweezers
• Plastic opening tool
• ESD-safe tweezers
• Spudger

2. Battery Replacement:

Step-by-Step:

• Power off the device and remove the SIM card tray.
• Use a suction cup to create a gap between the front panel and the frame.
• Insert a plastic pry tool into the gap and carefully slide it around the edges to loosen the adhesive.
• Lift the display carefully to avoid damaging the flex cables underneath.
• Remove the screws securing the battery connector bracket and carefully disconnect the battery connector.
• Using a spudger, gently pry the battery up from its adhesive hold. Be cautious not to puncture the battery.
• Replace with a new battery and reverse the steps to reassemble the device.

3. Screen Replacement:

Step-by-Step:

• Power off the device and remove the SIM card tray.
• Use a suction cup to lift the screen slightly and insert a plastic pry tool.
• Gently slide the pry tool around the edges to separate the screen from the frame.
• Disconnect the ribbon cables attached to the screen carefully.
• Remove the broken screen and clean any adhesive residue from the frame.
• Connect the new screen to the ribbon cables.
• Secure the new screen in place and reassemble the device by reversing the disassembly steps.

4. Camera Replacement:

Step-by-Step:

• Power off the device and remove the SIM card tray.
• Use a plastic opening tool to carefully remove the back cover of the phone.
• Remove screws securing the camera module and disconnect the cables.
• Carefully lift the camera module out of its slot using ESD-safe tweezers.
• Place the new camera module in position and connect the cables.
• Reattach the screws and back cover, then test the camera to ensure it’s functioning properly.

Conclusion:

Following these detailed steps carefully allows you to replace various Oppo Reno 3 repuestos (parts) efficiently and safely. Always ensure you have the correct replacement parts and tools before starting any repair. If unsure, seek professional assistance to avoid further damage to your device.