Oppo Reno 10 Pro cph2525 spare parts

Technical Characteristics of Oppo Reno 10 Pro Repuestos

Screen Replacement

The Oppo Reno 10 Pro features a 6.55-inch AMOLED display with a resolution of 1080 x 2400 pixels. The replacement screen maintains the same size and resolution, ensuring that the device retains its vivid display quality.

Battery Replacement

The Oppo Reno 10 Pro is powered by a non-removable Li-Po 4500mAh battery. The replacement battery offers the same capacity, allowing for a similar battery life experience post replacement.

Camera Replacement

The Oppo Reno 10 Pro includes a quad-camera setup with the following specifications:

• 64 MP, f/1.7, 26mm (wide)
• 13 MP, f/2.4, 52mm (telephoto)
• 8 MP, f/2.2, 16mm (ultrawide)
• 2 MP, f/2.4, (depth)

The replacement camera parts retain the same specifications to ensure photo quality remains unchanged.

Instructions for Replacing Oppo Reno 10 Pro Repuestos

Screen Replacement

• Step 1: Power off your device completely.
• Step 2: Use a SIM ejector tool to remove the SIM tray.
• Step 3: Gently heat the edges of the phone using a heat gun or hairdryer to soften the adhesive.
• Step 4: Insert a plastic opening tool or pick between the screen and back cover. Carefully work your way around the device to separate the back cover.
• Step 5: Disconnect the battery flex cable to prevent any electrical issues.
• Step 6: Disconnect the display connector and remove any screws holding the screen in place.
• Step 7: Carefully remove the old screen and replace it with the new one, ensuring all cables and connectors are properly aligned and secure.
• Step 8: Reassemble the device by following the steps in reverse order.

Battery Replacement

• Step 1: Power off your device.
• Step 2: Remove the back cover following the same steps as in the screen replacement process.
• Step 3: Disconnect the battery's flex cable from the motherboard.
• Step 4: Carefully pry out the battery using a plastic tool. Be careful not to puncture or bend the battery.
• Step 5: Insert the new battery and connect the flex cable back to the motherboard.
• Step 6: Reassemble the device by following the steps in reverse order.

Camera Replacement

• Step 1: Power off your device.
• Step 2: Remove the back cover using the same method as outlined in the screen replacement instructions.
• Step 3: Disconnect the battery to prevent any electrical mishaps.
• Step 4: Locate the camera module and disconnect the appropriate flex cables.
• Step 5: Remove any screws holding the camera module in place.
• Step 6: Gently remove the old camera module and replace it with the new one, ensuring all connectors are properly aligned and seated.
• Step 7: Reattach the battery and reassemble the device by following the steps in reverse order.