Oppo Reno 10X spare parts

Technical Characteristics of Oppo Reno 10X Repuestos

The Oppo Reno 10X replacement parts (repuestos) are designed to maintain the high performance and aesthetic appeal of your device. Here are some of the primary technical characteristics:

Screen Replacement

• Type: AMOLED capacitive touchscreen, 16M colors
• Size: 6.6 inches, 105.2 cm² (~93.1% screen-to-body ratio)
• Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~387 ppi density)
• Protection: Corning Gorilla Glass 6

Battery Replacement

• Type: Non-removable Li-Po 4065 mAh battery

Camera Replacement

• Main Camera: Triple 48 MP, f/1.7, (wide), 1/2.0"", 0.8µm, PDAF, laser AF, OIS + 13 MP, f/3.0, 130mm (periscope telephoto), PDAF, OIS, 5x optical zoom + 8 MP, f/2.2, 16mm (ultrawide), 1/3.2"", 1.4µm
• Front Camera: Motorized pop-up 16 MP, f/2.0, 26mm (wide), 1/3.1"", 1.0µm

Instructions on How to Replace Oppo Reno 10X Repuestos

1. Replacing the Screen

Follow these steps to replace the screen of your Oppo Reno 10X:

• Step 1: Turn off your phone and remove the SIM card tray.
• Step 2: Heat the edges of the screen with a heat gun to soften the adhesive.
• Step 3: Use a suction cup and a plastic opening tool to carefully separate the screen from the frame.
• Step 4: Disconnect the screen’s flex cables from the motherboard.
• Step 5: Remove any adhesive residue from the frame.
• Step 6: Connect the new screen’s flex cables to the motherboard.
• Step 7: Carefully set the new screen in place and press gently to secure it.
• Step 8: Reinsert the SIM card tray and turn on the phone to test the new screen.

2. Replacing the Battery

To replace the battery of your Oppo Reno 10X, follow these steps:

• Step 1: Power off your phone and remove the SIM card tray.
• Step 2: Use a heat gun to soften the adhesive on the back cover.
• Step 3: Use a suction cup and a plastic opening tool to carefully separate the back cover from the phone.
• Step 4: Remove the screws securing the battery connector shield and gently lift the shield.
• Step 5: Disconnect the battery connector from the motherboard.
• Step 6: Use a plastic pry tool to lift the battery out of the phone, taking care not to puncture it.
• Step 7: Place the new battery in the compartment and reconnect it to the motherboard.
• Step 8: Secure the battery connector shield with screws and reattach the back cover.
• Step 9: Turn on the phone to ensure the new battery works correctly.

3. Replacing the Camera

If you need to replace the camera of your Oppo Reno 10X, adhere to these instructions:

• Step 1: Power off the phone and remove the SIM card tray.
• Step 2: Use a heat gun to soften the adhesive securing the back cover.
• Step 3: Use a suction cup and plastic opening tool to gently lift and remove the back cover.
• Step 4: Unscrew and remove the metal shield covering the camera assembly.
• Step 5: Disconnect the camera module connector from the motherboard.
• Step 6: Carefully remove the camera module from the phone's body.
• Step 7: Position the new camera module in the correct place and reconnect it to the motherboard.
• Step 8: Replace the metal shield and secure it with screws.
• Step 9: Reattach the back cover and power on the device to test the new camera.

Please ensure all replacement procedures are carried out with caution to avoid damage to your device. If unsure, seek professional assistance.